New Equipment Construction Attachments For Sale In Buffalo

6.3 yard bucket 77" wide fits 385c cat

80 mm pins appears to fit 200 John Deere

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Cab Door: The door is in good shape. Glass: All of the glass is in good condition. Gauges, Controls, Function Buttons: Some of the pieces are with the cab shell. Cab Overall Condition Rating (1-10, 1= Worst, 10=Best): 7 Weight for Shipping: 2,000 lbs.

Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long Weight: 6,200 lbs. Description: All of the pin holes on this boom appear to be in decent shape. No cracks or repairs have been found..

All of the pin holes on this boom are in good condition and no cracks have been found. Weight:5,000 lbs. Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 20 feet Long No warping appears to be present.

Description: All of the pin holes on this stick are in good condtition. Weight:5,000 lbs. Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 19 1/2 feet Long The rest of the boom looks good.

Description: The working length of this stick is 10 feet, 3 inches or 3.1 Meters. There are no cracks or repairs present on this stick. All of the other pin holes look good. Weight: 2100 lbs.

Description: The working length of this stick is 9 feet, 2 inches or 2.8 meters. Weight: 1,100 lbs. Dimensions for shipping: 2 feet High, 3 feet Wide, 13 feet Long This stick has a thumb mount welded to the bottom of it.

Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long Weight: 3,800 lbs. Description: All of the pin holes and all of the pin boss surfaces look good on this boom. No cracks have been found.

Stick Information

LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION. ALL WIPER ARMS MISSING. VINYL SEAT HAS A FEW TEARS IN IT. HAS A/C WHICH IS NOT WORKING. CONTROL LINKAGE HAS SOME WEAR.

Description: The working length of this stick is 9 feet, 7 1/2 inches long or 2.94 meters. Weight: 1,500 lbs. Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long This stick has a thumb mount welded to it.

Description: The pin holes for the bellcrank pin, have a little wear and the boss surfaces around the holes having some "scoring" in them. Weight: 2500 lbs. Dimensions for shipping: 2 1/2 feet High, 3 1/2 feet Wide, 9 feet Long

The 2 cutting edges (p/n: 4T2315) need to be turned or replaced. Condition of Moldboard: Other than some wear at both bottom corners, the bottom of the moldboard appears to be in good shape.

Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found. Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long Weight: 1,800 lbs.

GEARAMATIC WITH DRIVE SHAFTS.

Description: All of the pin holes on this boom are in good shape and no cracks have been found. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long Weight: 1,500 lbs.

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long Weight: 2,000 lbs. Description: All of the pin holes on this boom appear to be in good shape. No cracks or repairs have been found.

All of the pin holes appear to be in good shape. This stick has a mount welded to the bottom of it. The working length of this stick is 10 feet, 1 1/2 inches or 3.05 meters. (Outer bushing part number: 61EN-13320).

Mid-section-15 foot long mid-section. Mid-section to jib section cylinder-The working condition of this cylinder is also unknown, although the rod is rusted as can be seen in the photos.

RECEIVED CAB GLASS NEW... NOT INSTALLED ...

Description: The working length of this stick is 9 feet, 7 1/2 inches. This stick has whats left of a thumb mount, welded to it. There two cracks on this stick (see photos) near where the stick cylinder pins to it.

6.6 METER Weight: 9,000 lbs. Dimensions for shipping: 7 1/2 feet High, 3 1/2 feet Wide, 24 feet Long

Description: The working length of this stick is 11 feet, 4 inches. Weight: 3,000 lbs. Dimensions for shipping: 1 1/2 feet High, 4 feet high, 15 1/2 feet Long This stick has had a thumb mount cutt off it and because of this ,it has a few light torch marks...