Heater/AC: Heater/AC unit is present with this cab shell. Other (Tag Info, etc.): The certification tag is attached in the upper RH, rear corner of this cab. Cab Door: The door is in good shape.
No cracks or repairs have been found.. Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long Description: All of the pin holes on this boom appear to be in decent shape. Weight: 6,200 lbs.
No warping appears to be present. All of the pin holes on this boom are in good condition and no cracks have been found. Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 20 feet Long
The rest of the boom looks good. Description: All of the pin holes on this stick are in good condtition. Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 19 1/2 feet Long
There are no cracks or repairs present on this stick. All of the other pin holes look good. Description: The working length of this stick is 10 feet, 3 inches or 3.1 Meters. Weight: 2100 lbs.
This stick has a thumb mount welded to the bottom of it. Description: The working length of this stick is 9 feet, 2 inches or 2.8 meters. Dimensions for shipping: 2 feet High, 3 feet Wide, 13 feet Long
No cracks have been found. Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long Description: All of the pin holes and all of the pin boss surfaces look good on this boom.
LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION. ALL WIPER ARMS MISSING. VINYL SEAT HAS A FEW TEARS IN IT. CONTROL LINKAGE HAS SOME WEAR. HAS A/C WHICH IS NOT WORKING.
This stick has a thumb mount welded to it. Description: The working length of this stick is 9 feet, 7 1/2 inches long or 2.94 meters. Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long
No cracks have been found. Description: The pin holes for the bellcrank pin, have a little wear and the boss surfaces around the holes having some "scoring" in them. Dimensions for shipping: 2 1/2 feet High, 3 1/2 feet Wide, 9 feet Long
Angling Frame: The pin holes for where the angling frame is pinned to the machine have a small amount of wear. Other (Tag Info, etc.): The following is stamped into the back of the blade on the RH side 1127447 2158 Blade Overall Condition Rating (1-10,...
Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found. Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long Weight: 1,800 lbs.
Description: All of the pin holes on this boom are in good shape and no cracks have been found. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long Weight: 1,500 lbs.
*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...
No cracks or repairs have been found. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long Description: All of the pin holes on this boom appear to be in good shape.
(Outer bushing part number: 61EN-13320). Dimensions for shipping: 2 feet High, 4 feet Wide, 15 feet Long. The working length of this stick is 10 feet, 1 1/2 inches or 3.05 meters. Weight: 2,200 lbs.
All of the pin holes appear to be in good shape and no cracks can be seen. Jib-section-13 1/2 foot long jib section. Hydraulic cylinders: Boom cylinders-The working condition of these cylinders is unknown.
This stick has whats left of a thumb mount, welded to it. There two cracks on this stick (see photos) near where the stick cylinder pins to it. Description: The working length of this stick is 9 feet, 7 1/2 inches.
This stick has had a thumb mount cutt off it and because of this ,it has a few light torch marks burned into it. Description: The working length of this stick is 11 feet, 4 inches.
