Milking Equipment Farm Supplies For Sale In Utah

Meter for measuring up to 42 kgs. The Meter fits into the long milk tube between each milking cluster and the milk pipeline and is designed for cleaning in place. The Waikato Milk Meter is an important management tool for the progressive dairymen.

2-1/4"x12" Ultraflow sock filters are designed for moderate to high pressure. Case of 12 boxes of 100 filters weighs 15 lbs.

6-1/2" in-line disk filters are specialized for pressure filtration. Case of 36 boxes of 100 filters weighs 20 lbs..

For sheep milking, the 2030018 Alignment Accessory is recommended. The bowl is ergonomically designed for quick and comfortable positioning of the claw under the udder. The Vanguard's large bowl capacity allows the milk to flow through smoothly, decreases...

Plastic Milk Bend is a full-flow plastic elbow which is useful to connect the inflation and milk tubing in goat and sheep milking claw set-ups.

This bucket is complete with a cow claw. It is set up ready to connect to any portable or bucket milker or to your vacuum and milk line. The D#95 pulsator is interchangeable with parts for the LL90 pulsator .

1-1/2" ID, 2-1/4" OD, 130 lbs. Transflow is the perfectly clear choice in dairy tubing. Strength, durability, flexibility and purity are the standards for TransflowM34R Dairy Tubing for milking machines, portable transfer systems and tank trucks.

9/16" ID 15/16" OD, 30 lbs. Stays transparent and resilient longer than plastic tubing. Silicone Milk Tubing is absolutely sanitary and, due to tightly bonded non-reactive pure resins, unaffected by milk fat or bacteria.

Electropolished, Stainless Steel strap-on pipe nipple fits 1-1/2” to 3” pipe and is ideal for wash lines. For 3/4” ID milk hose.

1/2" ID 3/4" OD, 17 lbs. Stays transparent and resilient longer than plastic tubing. Silicone Milk Tubing is absolutely sanitary and, due to tightly bonded non-reactive pure resins, unaffected by milk fat or bacteria.

6-1/2" non-gauze disk filters are designed for gravity filtration. Case of 36 boxes of 100 filters weighs 18 lbs.

Then, when the teat is removed at the end of milking, rapid air intake creates a vacuum in the valve which automatically closes it. The ITP205 is an individual milking clawpiece incorporating a shut-off mechanism which automatically controls the vacuum...

5/8" ID, 1" OD, 29 lbs. Transflow is the perfectly clear choice in dairy tubing. Strength, durability, flexibility and purity are the standards for TransflowM34R Dairy Tubing for milking machines, portable transfer systems and tank trucks.

The Vanguard Milking Claw Assembly includes two 0/524 silicone liners, two 2200/3209 plastic shells, silicone milk tubing and clear air tubing for a ready-made sheep milking assembly.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 7/16" ID, 3/16" Wall, 28 lbs.

For use with 2" milk line. Closed-end style filter comes complete with stainless steel body, insert and clamp and rubber O-ring, tab, and gasket. Closed-end style side-discharge filters are used with sock filters rather than tubes, which has several advantages.

Surcingle Rod for Suspended Milkers weighs approximately 1 lb.

The ITP207 Assembly for goats includes 0/385 rubber liners, shells, splitters, bracket and tubing for a ready-made goat milking assembly. ITP205 is made of high impact resistant materials and has a rounded smooth half-barrel shape.

Seal Kit f/Old-Style Surge Milk Pump - Includes carbon seal, rubber seal, small e-clip, try clamp flapper, surge style flapper, large 4" head gasket, 1/12" gasket.

2-1/4"x24" Ultraflow sock filters are designed for moderate to high pressure. Case of 6 boxes of 100 filters weighs 14 lbs.

Repalcement White Seal for 17" & 33" Stainless Steel Filters models M151000, M151002, M152000 and M152002.

2-1/2" Ball f/ 2" Moisture Trap

Coburn side-discharge filters come complete with stainless steel body, perforated stainless insert, 4" heavy duty clamp, O-ring, tab, rubber plug & gasket. 4 7/8" x 33" long for 2" line.

Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish. 1-1/8" long for 2.5" OD Tube.

Stainless Steel Pipeline Hanger comes with rubber grommets to hold pipe securely in place.

Black Gasket, (top under slide) 9/16".

This kit is for the LC Thomson Model 5 Milk Pump. External Seal Kit. Includes 1 head O-ring, 2 impeller clips, 1 ceramic ring assembly and 1 carbon seal assembly.