Milking Equipment Farm Supplies For Sale In Oklahoma

1.5" Blue Plastic Milk Valve features a 5/8" inlet.

Case of 12 boxes of 100 socks weighs 7 lbs. 2-1/4"x5-1/2" sock filters are designed for extremely low-pressure or vacuum pipeline systems.

Plastic Milk Bend is a full-flow plastic elbow which is useful to connect the inflation and milk tubing in goat and sheep milking claw set-ups.

Filter Clean is thicker than other competitive filter media. Schwartz 6-1/2" Standard Filter Clean non-gauze disks; 100 per box. Case of 36 boxes. Random fiber distribution provides uniform microscopic sediment traps.

Case of 6 boxes of 100 socks weighs 14 lbs. 2-1/4" x24 " Break-Proof Socks provide filtration for moderate to high pressure systems.

Closed-end style filter comes complete with stainless steel body, insert and clamp and rubber O-ring, tab, and gasket. "Blow-By" is eliminated even with large pump systems, sediment leakage is reduced, and installation of new filters is easier.

Ferrule for 3" OD tube is 29/32" long. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other.

Waikato Goat Meter with V-block mounting kit.

Tigerflex complies with all applicable FDA and 3-A sanitary standards for transfer of liquid dairy and food products. Clear hose allows visual confirmation of milk flow. Available in full cartons of 100 ft.

Bend for 1" OD tube features "B" dimension of 1.888". Bend for 2" OD tube features "B" dimension of 2-5/16".Bend for 2.5" OD tube features "B" dimension of 3".Bend for 3" OD tube features "B" dimension of 3".Bend for 4" OD tube features "B" dimension...

Includes 3 shaft O-rings, 1 head O-ring, 1 rotary seal spring, 1 teflon rotary seal and 2 impeller clips. Internal Seal Kit for LC Thomsen Milk Pump.

V-block Mounting Kit for permanent mount of Waikato Milk Meters on horizontal pipeline or vertical post.

Elbow for 3" OD tube features inner radius of 4.5" and center distance (C) of 5". 90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends.

Replacement Long Handle for 2609021 Deluxe Stainless Steel Milking Bucket.

Ceramic wear ring with Viton boot.

Lid fits buckets which measure 5.7" (145mm) between top of bucket and bottom of handle. Nipple is 5/8" ID. Gasket is included. The design features exceptional workmanship and fine polished stainless steel construction.

One size fits most. Put a milking glove over the sleeve for even more protection. Waterproof blue nylon sleeve has elastic and velcro at the top for perfect fit around upper arm. An extra pieces of fabric finished with black trim, loops under the thumb...

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for DeLaval and IBA features Stainless Steel jetter rack and 120115 jetter cups.

Bevel-seat recessless ferrule for 2-1/2" tubing is 1-1/2" long.

And includes all necessary nuts and bolts. Tee fastener for 1-5/8" x 2" tubing weighs 1 lb.

A special oil for use in lubricating pulsator leathers and moving parts. Will not congeal in cold weather. A case of twenty-four 8 oz. Squeeze bottles weighs 16 lbs.

Tuffy Filter Media is a multi-purpose non-woven material designed to have the strength, speed and capacity to function efficiently in vacuum, gravity and low or high pressure pipeline installations.2" x 24" Tuffy Socks for Delaval and Surge.

Handle dimension from top of bucket to bottom of long handle is 5-3/4", and bucket weighs 11 lbs. Top OD is 7 3/4" (195cm). Seven raised sections around the bottom of the bucket make the resting base solid and sturdy and provide a hand grip for ease of...

Plastic Knurled Nut for 4008043 and 4008097 Lids.

2.5" Blue Plastic Milk Valve features a 5/8" inlet.

Stainless Steel Open End Insert only for 33" In-Line Filter models M152000 or M152002

Elbow for 2.5" OD tube features inner radius of 3.75" and center distance (C) of 4.25". 90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends.