Milking Equipment Farm Supplies For Sale In Norman

Black Gasket, (top under slide) 5/8".

Letters "P & Q" on schematic diagram.

Case of 9 boxes. 50 tubes per box. Tuffy Filter Media is a multi-purpose non-woven material designed to have the strength, speed and capacity to function efficiently in vacuum, gravity and low or high pressure pipeline installations.4-7/8" x 33-1/2" Tuffy...

15" non-gauze disk filters are designed for gravity filtration. Case of 10 boxes of 100 filters weighs 27 lbs.

Vertical in-line Sock Dispenser in stainless steel with top cover and hinged door for 3" wide socks up to 25". Cabinet is made of smooth white enamel over galvanized steel.

4-1/4 x 14" Schwartz Flannel Stock, 50 per box.

This high-quality butterfly valve for 2.5" tube is made of 304 Stainless Steel for clamp connection. Not recommended for applications where pressure exceeds 150 psi.

Extra heavy cross clamp fits two pieces of 2-3/8" tubing.

The ITP205 Assembly for sheep includes two claws, 0/386 liners and shells as well as splitters, bracket and other tubing for a ready-made sheep milking assembly.

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other. Ferrule for 3" OD tube is 1/2" long with 2.834" ID.

Schwartz 4-9/16" In-Line Tuffy disks for Surge, Chore-Boy, Jamesway. Isotropic construction eliminates thin parts and weak spots. Filter Clean is thicker than other competitive filter media.

2"x24" Break-Proof Socks provide filtration for moderate to high pressure systems. Case of 6 boxes of 100 socks weighs 13 lbs.

Then, when the teat is removed at the end of milking, rapid air intake creates a vacuum in the valve which automatically closes it. ITP205 is made of high impact resistant materials and has a rounded smooth half-barrel shape.

3-1/2" x14 " Prefilter sock is an effective de-foamer. Case of 12 boxes of 100 tubes weighs 21 lbs.

Glass-to-Stainless Steel Ferrule with Gasket Groove is made of Type 304 Stainless Steel with #4 Dairy Finish. 3/4" long for 1.5" OD tube.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 3/8" ID, 1/8" Wall, 22 lbs.

Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish. 1-7/16" long for 3" OD tube.

The Meter fits into the long milk tube between each milking cluster and the milk pipeline and is designed for cleaning in place. Waikato Milk Meter retains a small percentage of the yield in a calibrated flask from which the cow's total yield may be read...

Stainless Steel Open End Insert only for 33" In-Line Filter models M152000 or M152002

2-1/4" non-gauze disk filters are designed for gravity filtration. Case of 10 boxes of 300 filters weighs 2 lbs.

Repalcement White Seal for 17" & 33" Stainless Steel Filters models M151000, M151002, M152000 and M152002.

Stays transparent and resilient longer than plastic tubing. Blue Silicone Tubing has a clean look and resists discoloration. 3/4" ID 1-3/16" OD, 40 lbs. Silicone Milk Tubing is absolutely sanitary and, due to tightly bonded non-reactive pure resins, unaffected...

Concentric Reducing Ferrule reduces from 2" to 1-1/2" tube and is 1-1/8" long.

CIP Thermometer is used to make sure the CIP wash solution is at the required 160F degrees at the start of the wash cycle. Thermometer registers from 1 to 220F and the face is 1" diameter with a 5" stainless steel stem.

Includes lid gasket. Inside dimension of lid is 8". Lid has two 3/4" diameter nipples and will fit any Coburn poly or stainless steel bucket. Fresh Cow Lid for bucket milker is made of impact resistant fully-approved transparent polycarbonate plastic.

3" Blue Plastic Milk Valve features a 5/8" inlet.

1.5" Blue Plastic Milk Valve features a 5/8" inlet.