Milking Equipment Farm Supplies For Sale In Mesa

6.5" Filter Disk for Milk Strainer - 5 boxes of 100. Also available in a Carton of 15 boxes of 100 filters.

Case of 9 boxes of 50 tubes weighs 31 lbs. 4-7/8"x36" Break-proof Tubes are designed for moderate to high pressure.

Spring Retainer Washer

1.5" Blue Plastic Milk Valve features a 5/8" inlet.

This model 4 Milk Pump has external seal, 1.5" clamp connection, 5/8" shaft and 1" milk outlet. When ordering pumps for other applications, please specify type of liquid to be pumped, gallons per minute, feet of head (the height to which liquid must be...

Top O.D. is 12-3/4" and bottom O.D. is 5" (127mm). For additional filtering, Strainer may be used with a disposable filter disks listed below. Strainer includes retainer ring, flat stainless steel mesh filter and a loop for hanging.

3-1/4 x 12" Schwartz Flannel Stock, 50 per box.

Plated Handle Set w/Screws f/ Poly Bucket

Includes Gaskets and Seal to repair old-style Delaval Milk Pump.

Made of high-strength plastic, the claw has two separate pushbuttons to open the chambers which allows control of vacuum during attachment and also allows bypassing one of the teats in case of infection.

Stainless Steel Milk Valve for 1.5" - 3" lines features a 5/8" inlet.

The accessory clips the air and milking tubes together to better balance the weight of the Vanguard underneath the udder. Alignment accessory is recommended for use with the Vanguard Milking Claw in particular when milking sheep.

Smooth non-porous bore prevents build-up of butterfat or milksoil and is unaffected by strong cleaners and sanitizers. 7/8" ID, 1-3/8" OD, 54 lbs. Transflow is the perfectly clear choice in dairy tubing.

The Vanguard is made out of clear polycarbonate for light weight and ease of visual inspection. For sheep milking, the 2030018 Alignment Accessory is recommended. The Vanguard Goat & Sheep Milking Claw is used along with the ITP205 claw when high -producing...

Smooth non-porous bore prevents build-up of butterfat or milksoil and is unaffected by strong cleaners and sanitizers. 7/16" ID, 3/4" OD, 18 lbs. Transflow is the perfectly clear choice in dairy tubing.

Compatible with any standard milking machine, the MK-V can be mounted either permanently with the V-block mounting kit (furnished) or a portable rapid mounting clamp sold separately.

12"x15" filter strips are sold in a case of 10 boxes with 100 filters per box.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 3/8" ID, 1/8" Wall, 22 lbs.

Stainless Steel Pipeline Hanger comes with rubber grommets to hold pipe securely in place.

Supplied with Goat and Sheep Classic Claw Milking Assemblies. Splitter for 5/8" milk line.

Plastic Milk Bend is a full-flow plastic elbow which is useful to connect the inflation and milk tubing in goat and sheep milking claw set-ups.

It is set up ready to connect to any portable or bucket milker or to your vacuum and milk line. The D#95 pulsator is interchangeable with parts for the LL90 pulsator . It takes 9/32" hose for both twin and air.

Traditional rubber liners for goats are designed to fit 2200/302 clear shells.

Bevel-seat recessless ferrule for 4" tubing is 1-1/2" long.

Clamp end tee for 4" tube has A-dimension of 4-1/2" and B-dimension of 9".

Stainless Steel Slide for Blue Milk Valve.

Part number "160118" on schematic diagram