Milking Equipment Farm Supplies For Sale In High Point

4-7/8" x17 " Break-Proof Socks provide filtration for moderate to high pressure systems. Case of 10 boxes of 50 socks weighs 9 lbs.

Silicone Milk Tubing is absolutely sanitary and, due to tightly bonded non-reactive pure resins, unaffected by milk fat or bacteria. 1/2" ID 3/4" OD, 17 lbs. Stays transparent and resilient longer than plastic tubing.

Plastic Milk Bend is a full-flow plastic elbow which is useful to connect the inflation and milk tubing in goat and sheep milking claw set-ups.

4-7/8"x17" Break-proof Tubes are designed for moderate to high pressure. Case of 10 boxes of 50 tubes weighs 18 lbs.

Stainless Steel Open End Insert only for 17" In-Line Filter models M151001 or M151003.

Stainless Steel Pipeline Hanger comes with PVC sleeve to hold pipe securely in place.

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other. Ferrule for 1.5" OD tube is 1/2" long with 1.375" ID.

Clamp end tee for 4" tube has A-dimension of 4-1/2" and B-dimension of 9".

Stainless Steel Pipeline Hanger comes with PVC sleeve to hold pipe securely in place.

Stainless Steel Pipeline Hanger comes with rubber grommets to hold pipe securely in place.

Screw for Blue Milk Valve.

The Coburn Clear Poly Fresh Cow Lid with gasket fits all Coburn buckets as well as 10 gallon cans. Includes lid gasket. Fits buckets with top ID from 6-3/4" to 8". Has two 5/8" nipples.

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends. Reducer from 2" OD to 1.5" OD tube is 2" long.

Schwartz has sized the sock and the coil perfectly to make a snug fit, thus eliminating the problem of loose filter media which can lead to breakage and lack of uniform filtration.

The Eco-Bucket is made of semi-transparent, translucent FDA-approved material. Top OK is 7-3/4" (195cm). Handle dimension from top of bucket to bottom of handle is 4-3/4" (120cm). It features smooth seamless molded interior and a raised reinforcement...

Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

Splitter for 5/8" milk line. Supplied with Goat and Sheep Classic Claw Milking Assemblies.

Soft, translucent, flexible and long-lasting silicone sheep liner last up to four times as long as rubber liners. For use with 2200/303 clear shells.

Lid features three 5/8" nipples and gasket is included. Clear Poly Lid is used for bucket milking for fresh cows and will fit any Coburn poly or stainless steel bucket or other buckets with top inside diameter from 6 3/4" to 8".

Silicone Milk Tubing is absolutely sanitary and, due to tightly bonded non-reactive pure resins, unaffected by milk fat or bacteria. 5/8" ID 1" OD, 32 lbs. Stays transparent and resilient longer than plastic tubing.

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120116 Jetter Cups for Surge. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.

180 Degree clamp-end U-bend for 1.5" tube OD features "A" dimension of 4-1/2". Type 304 Stainless Steel.

Plastic Knurled Nut for 4008043 and 4008097 Lids.

Replacement Stainless Steel Milking Handle for MP120X or MP140X only. Order side plate MPXHP separately.

Teflon bevel seat gasket for 2" OD tubing.

Lid Gasket (6-3/4 " x 7-7/8 " x 5/16 ") for Universal Inside Flange 122 Milker.

Moisture-proof water-resistant Solid State Liquid Level Control not including probe.