Milking Equipment Farm Supplies For Sale In Fort Worth

Additional pump sizes, configurations and parts are available upon request. When ordering pumps for other applications, please specify type of liquid to be pumped, gallons per minute, feet of head (the height to which liquid must be pumped), motor voltage,...

Case of 12 boxes of 100 socks weighs 7 lbs. 2-1/4"x5-1/2" sock filters are designed for extremely low-pressure or vacuum pipeline systems.

Case of 12 boxes of 100 socks weighs 14 lbs. 2-1/4"x12" sock filters are designed for extremely low-pressure or vacuum pipeline systems.

Strainer includes retainer ring, flat stainless steel mesh filter and a loop for hanging. For additional filtering, Strainer may be used with a disposable filter disks listed below.

Seal Kit f/Old-Style Surge Milk Pump - Includes carbon seal, rubber seal, small e-clip, try clamp flapper, surge style flapper, large 4" head gasket, 1/12" gasket.

Includes 3 shaft O-rings, 1 head O-ring, 1 rotary seal spring, 1 teflon rotary seal and 2 impeller clips. Internal Seal Kit for LC Thomsen Milk Pump.

Screw for Blue Milk Valve.

Black Gasket, (top under slide) 9/16".

Original equipment kit. External Seal Kit for LC Thomsen Model #4 Milk Pump includes head O-ring, 2 impeller clips, ceramic seal and rotary seal assembly.

For use with 2200/303 clear shells. Soft, translucent, flexible and long-lasting silicone sheep liner last up to four times as long as rubber liners.

Plated Handle Set w/Screws f/ Poly Bucket

Butt weld end tee for 3" tube has L-dimension of 3-1/4" and B-dimension of 6-1/2".

Closed-end style filter comes complete with stainless steel body, insert and clamp and rubber O-ring, tab, and gasket. For use with 2" milk line. "Blow-By" is eliminated even with large pump systems, sediment leakage is reduced, and installation of new...

3" Blue Plastic Milk Valve features a 5/8" inlet.

O-Ring only for MP2847B Complete In-Line Filter.

The Vanguard Goat & Sheep Milking Claw is used along with the ITP205 claw when high -producing goats and sheep require more safeguards against flooding or vacuum problems. The bowl is ergonomically designed for quick and comfortable positioning of the...

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for DeLaval and IBA features Drawer-Style Stainless Steel Jetter Rack and 120115 jetter cups.

Reducer from 3" OD to 2.5" OD tube is 2" long. Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends.

Elbow for 1" OD tube features inner radius of 1.5" and center distance (C) of 2". 90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends.

12"x15" filter strips are sold in a case of 10 boxes with 100 filters per box.

5/8" Stainless Steel Reversed Gooseneck fits 150200A Sliding Milk Valve.

Assembly includes unvented Vanguard Claw with shut-off, silicone milk tubing, clear milk bend, clear air tubing, two 281 clear silicone liners and two heavy duty 277 plastic shells.

Replacement Stainless Steel Cover for 6 quart Moisture Trap 6QMT.

Includes an additional handle at the bottom rim for ease of carrying and pouring. 65# (30 liters) with a shorter handle for D/L style lids. Rim diameter is 7-1/16” ID by 7-3/4” OD.

Tuffy Filter Media is a multi-purpose non-woven material designed to have the strength, speed and capacity to function efficiently in vacuum, gravity and low or high pressure pipeline installations.2" x 24" Tuffy Socks for Delaval and Surge.

Stays transparent and resilient longer than plastic tubing. 3/4" ID 1-3/16" OD, 40 lbs. Perfectly hygienic with a longer life span than other types of milk tubing when used properly, silicone tubing is as strong as plastic, more flexible than rubber,...

Case of 10 boxes weighs 31 lbs. 6" by 26" Break-proof Tubes for Dairymaster are designed for moderate to high pressure.