Milking Equipment Farm Supplies For Sale In Chesapeake

2"x24" Break-Proof Socks provide filtration for moderate to high pressure systems. Case of 6 boxes of 100 socks weighs 13 lbs.

2-1/4"x5-1/2" sock filters are designed for extremely low-pressure or vacuum pipeline systems. Case of 12 boxes of 100 socks weighs 7 lbs.

Includes 1 head O-ring, 2 impeller clips, 1 ceramic ring assembly and 1 carbon seal assembly. This kit is for the LC Thomson Model 5 Milk Pump. External Seal Kit.

Compatible with any standard milking machine, the Waikato meter can be mounted either permanently with the V-block mounting kit (furnished) or a portable rapid mounting clamp sold separately.

White Gasket, 5/8" for Blue Milk Valves.

8" non-gauze disk filters are designed for gravity filtration. Case of 24 boxes of 100 filters weighs 20 lbs.

3" Blue Plastic Milk Valve features a 5/8" inlet.

When ordering pumps for other applications, please specify type of liquid to be pumped, gallons per minute, feet of head (the height to which liquid must be pumped), motor voltage, hertz, phase and shaft size.

Then, when the teat is removed at the end of milking, rapid air intake creates a vacuum in the valve which automatically closes it. It may be ordered individually or in assemblies complete with shells, inflations, splitters, bracket and tubing.

Strength, durability, flexibility and purity are the standards for TransflowM34R Dairy Tubing for milking machines, portable transfer systems and tank trucks. Transflow is the perfectly clear choice in dairy tubing.

Stainless Steel Slide for Blue Milk Valve.

Black Gasket, (top under slide) 9/16".

Strength, durability, flexibility and purity are the standards for TransflowM34R Dairy Tubing for milking machines, portable transfer systems and tank trucks. Transflow is the perfectly clear choice in dairy tubing.

Clear Shell to fit 0/524 Silicone Liner.

Butt weld bevel-seat ferrule for 2-1/2" tubing is 27/32" long and B-dimension of 2-29/32" and C-dimension of 2-23/64".

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other. Ferrule for 2.5" OD tube is 1/2" long with 2.370" ID.

Rubber Retainer Cap for in-line filters.

Bevel-seat recessless ferrule for 2" tubing is 1-5/16" long.

Easy to inspect for cleaning and maintenance. ITP205 is made of high impact resistant materials and has a rounded smooth half-barrel shape. Less vacuum fluctuation when liners are fitted and removed, thus avoiding vacuum drop or intake of dirt.

The Coburn Receiver Group starts with finely finished stainless steel components and adds a 3/4 HP Leeson Washguard tm motor for extended life in wet, humid environments. All receiver groups are not the same.

Bevel-seat recessless ferrule for 2-1/2" tubing is 1-1/2" long.

Strength, durability, flexibility and purity are the standards for TransflowM34R Dairy Tubing for milking machines, portable transfer systems and tank trucks. Transflow is the perfectly clear choice in dairy tubing.

6-1/2" in-line disk filters are specialized for pressure filtration. Case of 36 boxes of 100 filters weighs 20 lbs..

Silicone Goat Liner with extended milk tube for goats.

Butt weld end tee for 4" tube has L-dimension of 3-7/8" and B-dimension of 7-3/4".

Handle dimension from top of bucket to bottom of long handle is 5-3/4", and bucket weighs 11 lbs. Replacement Long and Short Replacement Handles sold separately. This highly polished Stainless Steel Milking Bucket features a special bottom design which...

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120115 Jetter Cups for DeLaval and IBA. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.