Milk Pasteurization Machine

220VAC single phase, 60 Hz., 3 kW heater. Operation is easy with programmable keypad. Instructions included. Milky's 12 Gallon Stainless Steel, three walled, multipurpose kettle will process up to 12 gallons/45 liters of milk up to a temperature of 201°F/94°C...

Hot water is drained off and cold water is circulated to cool the milk. Thermostatic control ensures preservation of natural flavor while elimination all harmful bacteria. Heavy duty two-gallon capacity milk pasteurizer uses the same principles of pressurized...

This 7 Gallon Stainless Steel Pasteurizer will process 7 gallons/28 liters of milk up to a temperature of 161°F/72°C in about 1 ¼ hours. The Eco Midi Pasteurizer has additional insulation for energy saving construction.

Parts made of aluminum or stainless steel - easy to clean! Two gallon capacity. A thermostat to maintain constant 155° to 159° temperature. A buzzer that tells when milk is ready for cooling.

It is vented with valves and side to side pulsation. It takes 9/32" hose for both twin and air. The bucket comes complete with your choice of stainless steel bucket, D#95 pulsator , 14300 Style Claw, lid and hoses.

NuPulse Bucket Milker ( 10150NP ) - All NuPulse Pail Milker Units come complete with a bucket, lid, hoses and NuPulse cow milker claw. The pulsator is adjustable and is easily taken apart and reassembled with no tools making it easy for even the least...

Replacement rubber for the Kleen Flo Pail Milker Unit. Includes 2, 4, 12, 11, 20A, 23A. Includes 4 inflations, 4 short air tubes, 32" x 5/8" clear milk hose, 37" x 9/32" twin rubber hose, 12' x 1/2" clear vacuum hose & Lid gasket.

Plated Handle Set w/Screws f/ Poly Bucket

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 5/8" ID, 13/64" Wall, 38 lbs.

Surcingle Rod for Suspended Milkers weighs approximately 1 lb.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 1/2" ID, 3/16" Wall, 30 lbs.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 9/16" ID, 7/32" Wall, 38 lbs.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 7/16" ID, 3/16" Wall, 28 lbs.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 3/8" ID, 1/8" Wall, 22 lbs.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 9/32" ID, 1/8" Wall, 14 lbs.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 9/16" ID, 7/32" Wall, 38 lbs.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 3/8" ID, 1/8" Wall, 22 lbs.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 1/2" ID, 3/16" Wall, 30 lbs.

Surcingle is used to hold a Surge bucket milker in place under the cow. Long with 13 brass grommets. Our Surcingle is a heavy-duty strap with a corrosion resistant triangle.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 7/16" ID, 3/16" Wall, 28 lbs.

Black milking machine tubing has good flexibility and resistance to kinking, tears and splits. 9/32" ID, 1/8" Wall, 14 lbs.

Coburn Milking Buckets are made out of fully approved, high polish stainless steel. 80# (34 liters) with Long handle Wt. 14 lbs. Rim diameter is 7-1/16” ID by 7-3/4” OD. Includes an additional handle at the bottom rim for ease of carrying and pouring.

Gasket included. Fresh Cow Lid for bucket milker is made of impact resistant fully-approved transparent polycarbonate plastic. Lid has three 3/4" diameter nipples and will fit any Coburn poly or stainless steel bucket.

Handle dimension from top of bucket to bottom of handle is 4-3/4" (120cm). Eco-Bucket has a stainless steel D/L-style (short) locking handle, snap-on handle attachment (fits either side of bucket) and molded-in permanent scale marked in lbs.

Clear Poly Lid is used for bucket milking for fresh cows and will fit any Coburn poly or stainless steel bucket or other buckets with top inside diameter from 6 3/4" to 8". Lid features three 5/8" nipples and gasket is included.

Gasket is included. ID of the lid is 7-/8". Nipples are 5/8" ID. This milking lid has a locking handle for long-handle buckets. Lid fits buckets which measure 5.7" (145mm) between top of bucket and bottom of handle.

Orbiter Cow Milking Assembly f/EcoMilker. For use with 3005033 and 3005035 EcoMilkers.