Milk Line Washing Components Milking Equipment For Sale In San Jose

110V Motor f/Depend-O-Drain

Silicone Grease (Required when replacing Peristaltic Pump Tubes) RFE Silicone Grease f / Peristaltic Pump Tubing.

Programmer can set a variety of adjustments including on/off, run times and delay times from 1 second to 45 minutes. Summit E Programmer is used to control the #1209838 Three-Pump Peristaltic Pump to automate and improve accuracy of dairy sanitation chemical...

Coburn"s Black Plastic Distributor Tee is smooth throughout for efficient water flow and is an economical alternative to the Stainless Steel Distributor Tee.

Bender Diverter Valve - 120V

Ferrule for 1.5" OD tube is 1/2" long with 1.375" ID. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other.

Clamp end tee for 4" tube has A-dimension of 4-1/2" and B-dimension of 9".

Thermometer has a recalibration feature and includes a plastic carrying case. Thermometer registers from 1 to 220F and the face is 1" diameter with a 5" stainless steel stem. CIP Thermometer is used to make sure the CIP wash solution is at the required...

For 2" OD tube. Surge-Style Roll-On Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish.

Ell for 3" OD tube features "A" dimension of 6-5/16" and "B" dimension of 6-13/16”. 90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other.

4" Wash Valve weighs 5 lbs. Shut-off plugs and parts available separately. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks...

Type 304 Stainless Steel. 180 Degree clamp-end U-bend for 1.5" tube OD features "A" dimension of 4-1/2".

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120116 Jetter Cups for Surge.

Butt weld end tee for 4" tube has L-dimension of 3-7/8" and B-dimension of 7-3/4".

Butt weld end tee for 3" tube has L-dimension of 3-1/4" and B-dimension of 6-1/2".

Reducer from 3" OD to 2.5" OD tube is 2" long. Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends.

Elbow for 3" OD tube features inner radius of 4.5" and center distance (C) of 5". 90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends.

Reducer from 4" OD to 2" OD tube is 8" long. Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends.

Long round wash and milk shut-off plug for 3a" line.

Original equipment kit. External Seal Kit for LC Thomsen Model #4 Milk Pump includes head O-ring, 2 impeller clips, ceramic seal and rotary seal assembly.

Replacement pump tube with fittings, 8" piece."

Ferrule for 2" OD tube is 1/2" long with 1.870" ID. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

O-Ring only for MP2847B Complete In-Line Filter.

Reducer from 4" OD to 3" OD tube is 5-1/8" long. Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends.

Bevel-seat recessless ferrule for 2-1/2" tubing is 1-3/8" long.

Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately). 115VAC with drip-proof motor enclosure. May be plumbed directly to the drain.