Milk Line Washing Components Milking Equipment For Sale In Oregon

Replacement pump tube with fittings, 8" piece."

This smooth, white Tee is made out of food-grade plastic.

Short round wash and milk shut-off plug for 3a" line.

2-1/2" Wash Valve weighs 2.5 lbs. Shut-off plugs and parts available separately. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which...

Programmer can set a variety of adjustments including on/off, run times and delay times from 1 second to 45 minutes. Summit E Programmer is used to control the #1209838 Three-Pump Peristaltic Pump to automate and improve accuracy of dairy sanitation chemical...

Wall or direct-mounted, air injector operates on 120 volts. Intake orifice is 1-1/2". Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic.

Tubes are aligned for ease and convenience of hose handling. Coburn"s S.S. Distributor Tee is smooth and clean throughout for efficient water flow.

Long round wash and milk shut-off plug for 3a" line.

Replaces Milk-Rite 7100. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for DeLaval and IBA features Stainless Steel jetter rack and 120115 jetter cups.

It may be combined with the 8950 Timer Control Module for more functionality. Capacity, switch setting to program pump run time, hot and cold water valves, cycle timer and is CSA-approved.

Coburn"s Black Plastic Distributor Tee is smooth throughout for efficient water flow and is an economical alternative to the Stainless Steel Distributor Tee.

Fits all claws including DeLaval. Heavy duty Drawer-Style Stainless Steel Jetter Rack includes nuts and bolts for mounting.

1-1/8" long for 2.5" OD Tube. Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish.

Clamp end tee for 3" tube has A-dimension of 3-3/4" and B-dimension of 7-1/2".

Ferrule for 2.5" OD tube is 27/32" long. Ferrule for 1.5" OD tube is 23/32" long. Ferrule for 3" OD tube is 29/32" long. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the...

Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish. 1-3/8" long for 2.5" OD tube. 1-3/16" long for 2" OD tube. 1-1/8" long for 1.5" OD tube.

Clamp end tee for 2" tube has A-dimension of 3-1/2" and B-dimension of 7".

Type 304 Stainless Steel. 180 Degree butt-weld U-bend for 2.5" tube OD features "A" dimension of 7-1/2".

Short round wash and milk shut-off plug for 2" line.

Extra heavy cross clamp fits two pieces of 2-3/8" tubing.

1-1/8" long for 3" OD Tube. Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish.

Butt weld end tee for 3" tube has L-dimension of 3-1/4" and B-dimension of 6-1/2".

1-1/8" long for 2" OD Tube. Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish.

Includes Gaskets and Seal to repair old-style Delaval Milk Pump.

Reducer from 4" OD to 2.5" OD tube is 7-1/8" long. Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends.