Milk Line Washing Components Milking Equipment For Sale In Oklahoma

110V Motor f/Depend-O-Drain

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7103.

Short round wash and milk shut-off plug for 2" line.

4" Wash Valve weighs 5 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

Summit E Programmer is used to control the #1209838 Three-Pump Peristaltic Pump to automate and improve accuracy of dairy sanitation chemical dispensing. Programmer can set a variety of adjustments including on/off, run times and delay times from 1 second...

This CIP Assembly for DeLaval and IBA features Drawer-Style Stainless Steel Jetter Rack and 120115 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Bender Diverter Valve - 120V

Wall or direct-mounted, air injector operates on 120 volts. Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

CIP components are sold individually, or as part of complete kit. Stainless Steel Fit ‘em All Heavy Duty Jetter Rack will hold virtually any milking claw including Delaval. Hardware is included.

This smooth, white Tee is made out of food-grade plastic.

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other. Ferrule for 2.5" OD tube is 27/32" long.

3" Wash Valve weighs 3 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 2" OD tube features inner radius of 3" and center distance (C) of 3.5".

Round Gasket, 5/8" for Blue Milk Valves.

90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other. Ell for 4" OD tube features "A" dimension of 8-5/16" and "B" dimension of 8-15/16".

This high-quality butterfly valve for 2.5" tube is made of 304 Stainless Steel for clamp connection. Not recommended for applications where pressure exceeds 150 psi.

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other. Ferrule for 4" OD tube is 5/8" long with 4" ID.

180 Degree clamp-end U-bend for 2.5" tube OD features "A" dimension of 7-1/2". Type 304 Stainless Steel.

Each pump has a multi-time module to program on/off, run times and delay times from 1 second to 45 minutes. LEDs are added to help diagnose washer trigger supply issues. L5000 Plus Peristaltic 3-Pump Panel can be retrofitted to existing pipeline wash...

Electropolished, Stainless Steel strap-on pipe nipple fits 1-1/2” to 3” pipe and is ideal for wash lines. For 9/16” ID milk hose.

Teflon Tri-Clamp Gasket.

180 Degree butt-weld U-bend for 2" tube OD features "A" dimension of 6". Type 304 Stainless Steel.

Electropolished, Stainless Steel strap-on pipe nipple fits 1-1/2” to 3” pipe and is ideal for wash lines. For 3/4” ID milk hose.

Clamp end tee for 1-1/2" tube has A-dimension of 2-3/4" and B-dimension of 5-1/2".

45 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 2.5" OD tube features "C" dimension of 2-1/16".

Stainless Steel Nut for Blue Milk Valve.

Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish. 1-3/8" long for 2.5" OD tube.