Milk Line Washing Components Milking Equipment For Sale In New Jersey

Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

Thermometer registers from 1 to 220F and the face is 1" diameter with a 5" stainless steel stem. CIP Thermometer is used to make sure the CIP wash solution is at the required 160F degrees at the start of the wash cycle.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120116 Jetter Cups for Surge.

Short round wash and milk shut-off plug for 2-1/2" line.

Long round wash and milk shut-off plug for 3a" line.

Hardware is included. Jetter Rack is sold individually, or as part of complete kit. The 120112 has rounded insert for holding the jetter cups. Stainless Steel Fit ‘em All Jetter Rack will hold virtually any milking claw including Delaval.

Programmer can set a variety of adjustments including on/off, run times and delay times from 1 second to 45 minutes. Summit E Programmer is used to control the #1209838 Three-Pump Peristaltic Pump to automate and improve accuracy of dairy sanitation chemical...

Replaces Milk-Rite 7103. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

Tubes are aligned for ease and convenience of hose handling. Coburn"s S.S. Distributor Tee is smooth and clean throughout for efficient water flow.

115VAC with drip-proof motor enclosure. 50-60 Hz, .31 amp. May be plumbed directly to the drain. Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately).

Ideal for storage and cleaning in place, this claw hanger includes hangar and U-bolt for installation on stall tubing. Use the Coburn stainless steel claw hanger whenever you need to hang a Delaval or other style claw upside-down.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for DeLaval and IBA features Stainless Steel jetter rack and 120115 jetter cups.

Replaces Milk-Rite 7102. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

A complete pipeline washer may be made by combining the Timer Control Module with the 9740 Three-Jar or the 9590 Three Pump Dispenser. Timer Control Module features electro-mechanical timing, failsafe timer, standard 8-minute wash cycle, 24-hour clock...

BUY BULK! FREE SHIPPING! Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

LEDs are added to help diagnose washer trigger supply issues. Each pump has a multi-time module to program on/off, run times and delay times from 1 second to 45 minutes. L5000 Plus Panel features stainless steel cabinet with new sloping design, snap-in...

This smooth, white Tee is made out of food-grade plastic.

Intake orifice is 1-1/2". Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

Coburn"s Black Plastic Distributor Tee is smooth throughout for efficient water flow and is an economical alternative to the Stainless Steel Distributor Tee.

110V Motor f/Depend-O-Drain

Type 304 Stainless Steel. 180 Degree butt-weld U-bend for 2" tube OD features "A" dimension of 6".

Includes 1 head O-ring, 2 impeller clips, 1 ceramic ring assembly and 1 carbon seal assembly. External Seal Kit. This kit is for the LC Thomson Model 5 Milk Pump.

Jars have a capacity of 30 oz. Three-Jar Dispenser may be combined with the Timer Control Module to make a complete pipeline wash system. Of water hose, and sink bracket. Three-Jar Dispenser includes hot and cold water valves, 25 ft.

Elbow for 1.5" OD tube features inner radius of 2.25" and center distance (C) of 2.75". 90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends.

Butt weld end tee for 2-1/2" tube has L-dimension of 3" and B-dimension of 6".

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for DeLaval and IBA features Drawer-Style Stainless Steel Jetter Rack and 120115 jetter cups.

Elbow for 3" OD tube features inner radius of 4.5" and center distance (C) of 5". 90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends.