Milk Line Washing Components Milking Equipment For Sale In New Hampshire

115 volt 60 HZ. L5000 Plus Peristaltic 3-Pump Panel can be retrofitted to existing pipeline wash control systems or used with optional Programmer (#1201354) to automate and improve the accuracy of dairy sanitation chemical dispensing.

This smooth, white Tee is made out of food-grade plastic.

Timer Control Module features electro-mechanical timing, failsafe timer, standard 8-minute wash cycle, 24-hour clock for automatic pre-sanitizing, door interlock and is CSA-approved.

Silicone Grease (Required when replacing Peristaltic Pump Tubes) RFE Silicone Grease f / Peristaltic Pump Tubing.

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7103.

Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

Long round wash and milk shut-off plug for 2" line.

Replacement pump tube with fittings, 8" piece."

3" Wash Valve weighs 3 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

CIP components are sold individually, or as part of complete kit. Stainless Steel Fit ‘em All Heavy Duty Jetter Rack will hold virtually any milking claw including Delaval. Hardware is included.

4" Wash Valve weighs 5 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

Bender Diverter Valve - 120V

Clamp end tee for 3" tube has A-dimension of 3-3/4" and B-dimension of 7-1/2".

Seal Kit f/Old-Style Surge Milk Pump - Includes carbon seal, rubber seal, small e-clip, try clamp flapper, surge style flapper, large 4" head gasket, 1/12" gasket.

Clamp end tee for 2" tube has A-dimension of 3-1/2" and B-dimension of 7".

Butt weld end tee for 3" tube has L-dimension of 3-1/4" and B-dimension of 6-1/2".

Coburn"s Black Plastic Distributor Tee is smooth throughout for efficient water flow and is an economical alternative to the Stainless Steel Distributor Tee.

90 Degree tube bend for 4" tube OD features "A" dimension of 8-5/16". Type 304 Stainless Steel.

Bend for 2" OD tube features "B" dimension of 2-5/16".Bend for 2.5" OD tube features "B" dimension of 3".Bend for 3" OD tube features "B" dimension of 3".Bend for 4" OD tube features "B" dimension of 4-13/16".

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion. Five-gallon pail.

90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 4" OD tube features inner radius of 6" and center distance (C) of 6-5/8".

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120115 Jetter Cups for DeLaval and IBA. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.

Teflon bevel seat gasket for 2" OD tubing.

Clamp-end Special Y for 3" tube OD features "A" dimension of 5" and "B" dimension of 10". Type 304 Stainless Steel.

Rubber tri-clamp gasket for 2" OD tubing.

Stainless Steel Milk Valve for 1.5" - 3" lines features a 5/8" inlet.

This high-quality butterfly valve for 2" tube is made of type 316 Stainless Steel for clamp connection. Not recommended for applications where pressure exceeds 150 psi.