Milk Line Washing Components Milking Equipment For Sale In Mississippi

Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted. Intake orifice is 1-1/2".

Short round wash and milk shut-off plug for 2" line.

Replacement pump tube with fittings, 8" piece."

Three-Jar Dispenser includes hot and cold water valves, 25 ft. Three-Jar Dispenser may be combined with the Timer Control Module to make a complete pipeline wash system. Of water hose, and sink bracket.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for Surge features Stainless Steel jetter rack and 120116 jetter cups.

High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

Short round wash and milk shut-off plug for 2-1/2" line.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120116 Jetter Cups for Surge.

Bevel-seat recessless ferrule for 4" tubing is 1-5/8" long.

3" Blue Plastic Milk Valve features a 5/8" inlet.

Clamp end tee for 2" tube has A-dimension of 3-1/2" and B-dimension of 7".

White Gasket, 5/8" for Blue Milk Valves.

Butt weld bevel-seat ferrule for 4" tubing.

Screw for Blue Milk Valve.

Type 304 Stainless Steel. Butt-Weld-end Special Y for 2.5" tube OD features "A" dimension of 4-1/4" and "B" dimension of 8-1/2".

Clamp end tee for 1-1/2" tube has A-dimension of 2.375" and B-dimension of 4.75".

This smooth, white Tee is made out of food-grade plastic.

Seal Kit f/BouMatic Milk Pump

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120115 Jetter Cups for DeLaval and IBA.

Reducer from 3" OD to 2.5" OD tube is 2" long. Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends.

End cap for 4" OD tube has 4.5" OD. Solid End Cap for Bevel Seat is made of Type 304 Stainless Steel with #4 Dairy Finish.

After-market equipment. External Seal Kit for LC Thomsen #4, 5 or 6 Milk Pumps includes housing gasket, rotary seal assembly, ceramic seal and 2 impeller clips.

2" rubber gasket for Surge stainless steel pipeline.

Reducer from 4" OD to 3" OD tube is 5-1/8" long. Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends.

Type 304 Stainless Steel. 180 Degree clamp-end U-bend for 2.5" tube OD features "A" dimension of 7-1/2".

Flange is 6" in diameter. Stainless Steel Wall Flange for 3" is also available for 1.5", 2", 2.5" and 4" tubing.

2-Blade Impeller f/ Milk Pump