Milk Line Washing Components Milking Equipment For Sale In Minnesota

Programmer can set a variety of adjustments including on/off, run times and delay times from 1 second to 45 minutes. Summit E Programmer is used to control the #1209838 Three-Pump Peristaltic Pump to automate and improve accuracy of dairy sanitation chemical...

Jetter Rack is sold individually, or as part of complete kit. Stainless Steel Fit ‘em All Jetter Rack will hold virtually any milking claw including Delaval. Hardware is included.

50-60 Hz, .31 amp. Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately). 115VAC with drip-proof motor enclosure. May be plumbed directly to the drain.

Three-Jar Dispenser may be combined with the Timer Control Module to make a complete pipeline wash system. Three-Jar Dispenser includes hot and cold water valves, 25 ft. Jars have a capacity of 30 oz.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120115 Jetter Cups for DeLaval and IBA.

Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

LEDs are added to help diagnose washer trigger supply issues. Each pump has a multi-time module to program on/off, run times and delay times from 1 second to 45 minutes. 115 volt 60 HZ.

110V Motor f/Depend-O-Drain

For 1.5" OD tube. Surge-Style Roll-On Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic.

1-1/2" rubber gasket for Surge stainless steel pipeline.

Replacement pump tube with fittings, 8" piece."

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other.Ferrule for 2" OD tube is 23/32" long.

A complete pipeline washer may be made by combining the Timer Control Module with the 9740 Three-Jar or the 9590 Three Pump Dispenser. Timer Control Module features electro-mechanical timing, failsafe timer, standard 8-minute wash cycle, 24-hour clock...

Bevel-seat recessless ferrule for 4" tubing is 1-5/8" long.

Concentric Reducing Ferrule reduces from 2" to 1-1/2" tube and is 1-1/8" long.

Shut-off plugs and parts available separately. 4" Wash Valve weighs 5 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks...

Reducer from 4" OD to 2.5" OD tube is 7-1/8" long. Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends.

Not recommended for applications where pressure exceeds 150 psi. This high-quality butterfly valve for 4" tube is made of type 316 Stainless Steel for clamp connection.

Flange is 6" in diameter. Stainless Steel Wall Flange for 3" is also available for 1.5", 2", 2.5" and 4" tubing.

Type 304 Stainless Steel. Butt-Weld-end Special Y for 2" tube OD features "A" dimension of 3-1/2" and "B" dimension of 7".

Intake orifice is 1-1/2". Wall or direct-mounted, air injector operates on 120 volts. Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

1-3/16" long for 2" OD tube. Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish.

Reducer from 4" OD to 2" OD tube is 8" long. Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends.

4" Tube OD style features "A" dimension of 4-7/16" and "B" dimension of 1-1/2" Hexagonal Union Nut is made of type 304 Stainless Steel with #4 Dairy Finish.

Fits up to 3" pipeline. Deluxe plastic-coated Pipeline Hanger includes two 4" clamps, two 2.5" clamps and two stainless steel clips.

Type 304 Stainless Steel. Clamp-end Special Y for 3" tube OD features "A" dimension of 5" and "B" dimension of 10".