Milk Line Washing Components Milking Equipment For Sale In Los Angeles

115 volt 60 HZ. Each pump has a multi-time module to program on/off, run times and delay times from 1 second to 45 minutes. L5000 Plus Peristaltic 3-Pump Panel can be retrofitted to existing pipeline wash control systems or used with optional Programmer...

Heavy duty Drawer-Style Stainless Steel Jetter Rack includes nuts and bolts for mounting. Fits all claws including DeLaval.

Timer Control Module features electro-mechanical timing, failsafe timer, standard 8-minute wash cycle, 24-hour clock for automatic pre-sanitizing, door interlock and is CSA-approved.

110V Motor f/Depend-O-Drain

Diverter Plug for 2" Glass Tee.

Short round wash and milk shut-off plug for 2-1/2" line.

This CIP Assembly for BouMatic features Stainless Steel jetter rack and 120117 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted. Intake orifice is 1-1/2".

Stainless Steel Fit ‘em All Heavy Duty Jetter Rack will hold virtually any milking claw including Delaval. Hardware is included. CIP components are sold individually, or as part of complete kit.

Replacement pump tube with fittings, 8" piece."

Long round wash and milk shut-off plug for 2" line.

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.

Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish. 1-1/8" long for 4" OD Tube.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion. Five-gallon pail.

2.5" Blue Plastic Milk Valve features a 5/8" inlet.

Butt weld bevel-seat ferrule for 3" tubing is 29/32" long and B-dimension of 3-7/16" and C-dimension of 2-55/64".

90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 2" OD tube features inner radius of 3" and center distance (C) of 3.5".

High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

Seal Kit f/BouMatic Milk Pump

Butt weld end tee for 2" tube has L-dimension of 3" and B-dimension of 6".

90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 4" OD tube features inner radius of 6" and center distance (C) of 6-5/8".

180 Degree clamp-end U-bend for 3" tube OD features "A" dimension of 9". Type 304 Stainless Steel.

Black Gasket, (top under slide) 5/8".

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends. Reducer from 4" OD to 1.5" OD tube is 10" long.

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other. Ferrule for 3" OD tube is 29/32" long.

Solid End Cap for Tri-Clover line is made of Type 304 Stainless Steel with #4 Dairy Finish. End cap for 1.5" OD tube has 1.98" OD.

Hexagonal Union Nut is made of type 304 Stainless Steel with #4 Dairy Finish. 4" Tube OD style features "A" dimension of 4-7/16" and "B" dimension of 1-1/2"