Milk Line Washing Components Milking Equipment For Sale In Illinois

Tubes are aligned for ease and convenience of hose handling. Coburn"s S.S. Distributor Tee with vent hole is smooth and clean throughout for efficient water flow.

Intake orifice is 1-1/2". Wall or direct-mounted, air injector operates on 120 volts. Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

Replaces Milk-Rite 7100. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

Shut-off plugs and parts available separately. 3" Wash Valve weighs 3 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks...

Shut-off plugs and parts available separately. 2" Wash Valve weighs 2 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks...

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for DeLaval and IBA features Stainless Steel jetter rack and 120115 jetter cups.

Tubes are aligned for ease and convenience of hose handling. Coburn"s S.S. Distributor Tee is smooth and clean throughout for efficient water flow.

A complete pipeline washer may be made by combining the Timer Control Module with the 9740 Three-Jar or the 9590 Three Pump Dispenser. Timer Control Module features electro-mechanical timing, failsafe timer, standard 8-minute wash cycle, 24-hour clock...

BUY BULK! FREE SHIPPING! Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

Ideal for storage and cleaning in place, this claw hanger includes hangar and U-bolt for installation on stall tubing. Use the Coburn stainless steel claw hanger whenever you need to hang a Delaval or other style claw upside-down.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic.

Replaces Milk-Rite 7102. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

Bevel-seat recessless ferrule for 1-1/2" tubing is 1-1/8" long.

Bevel-seat recessless ferrule for 4" tubing is 1-1/2" long.

1-1/8" long for 2.5" OD Tube. Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish.

Bevel-seat recessless ferrule for 2" tubing is 1-5/16" long.

Stainless Steel Milk Valve for 1.5" - 3" lines features a 5/8" inlet.

Butt weld end tee for 4" tube has L-dimension of 3-7/8" and B-dimension of 7-3/4".

Bevel-seat recessless ferrule for 4" tubing is 1-5/8" long.

Ferrule for 2.5" OD tube is 1/2" long with 2.370" ID. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other.

Bevel-seat recessless ferrule for 2" tubing is 1-3/8" long.

Seal Kit f/New-Style Westfalia Milk Pump

Type 304 Stainless Steel. 90 Degree tube bend for 2" tube OD features "A" dimension of 4-1/16".

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120115 Jetter Cups for DeLaval and IBA.

Long round wash and milk shut-off plug for 2" line.

1-3/16" long for 2" OD tube. Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish.

After-market equipment. External Seal Kit for LC Thomsen #4, 5 or 6 Milk Pumps includes housing gasket, rotary seal assembly, ceramic seal and 2 impeller clips.