Agiseek home

Milk Line Washing Components Milking Equipment For Sale In Florida

Become a Partner
Sentinel Air Injector
Prices start at : 982.15 USD / each

Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted. Wall or direct-mounted, air injector operates on 120 volts.
  • Weight: 3 lbs
United States
Florida
Claw Hangar f/ DeLaval Claw
Prices start at : 47.59 USD / each

Use the Coburn stainless steel claw hanger whenever you need to hang a Delaval or other style claw upside-down. Ideal for storage and cleaning in place, this claw hanger includes hangar and U-bolt for installation on stall tubing.
  • Weight: 1 lbs
United States
Florida
Black Plastic Distributor
Prices start at : 6.39 USD / each

Coburn"s Black Plastic Distributor Tee is smooth throughout for efficient water flow and is an economical alternative to the Stainless Steel Distributor Tee.
  • Weight: 0.5 lbs
United States
Florida
Depend-O-Drain
Prices start at : 131.55 USD / each

Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately). May be plumbed directly to the drain. 50-60 Hz, .31 amp. 115VAC with drip-proof motor enclosure.
  • Weight: 2 lbs
United States
Florida
2 1/2\
Prices start at : 264.55 USD / each

High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.
  • Weight: 2.5 lbs
United States
Florida
CIP w/ Heavy-Duty SS Rack & Tee f/ DeLaval & IBA
Prices start at : 54.95 USD / each

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120115 Jetter Cups for DeLaval and IBA. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.
  • Weight: 5 lbs
United States
Florida
Bender Diverter Valve - 120V
Prices start at : 352.64 USD / each

Bender Diverter Valve - 120V
  • Weight: 5 lbs
United States
Florida
3\
Prices start at : 112.50 USD / each

Long round wash and milk shut-off plug for 3a" line.
  • Weight: 0.13 lbs
United States
Florida
Concentric Reducer (Weld/Weld)--4\
Prices start at : 53.48 USD / each

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends. Reducer from 4" OD to 3" OD tube is 4" long.
  • Weight: 0.5 lbs
United States
Florida
Bender Dispenser Complete w/3 Pumps
Prices start at : 1428.35 USD / each

Three-Pump Dispenser features three motor-driven peristaltic pumps each with 300 oz. It may be combined with the 8950 Timer Control Module for more functionality. Capacity, switch setting to program pump run time, hot and cold water valves, cycle timer...
United States
Florida
3\
Prices start at : 337.84 USD / each

High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.
  • Weight: 3 lbs
United States
Florida
LC Thomsen #4 Pump w/External Seal Kit & 5/8\
Prices start at : 1922.65 USD / each

When ordering pumps for other applications, please specify type of liquid to be pumped, gallons per minute, feet of head (the height to which liquid must be pumped), motor voltage, hertz, phase and shaft size.
  • Weight: 10 lbs
United States
Florida
Concentric Reducer (Clamp/Clamp)--3\
Prices start at : 82.20 USD / each

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends. Reducer from 3" OD to 2" OD tube is 5" long.
  • Weight: 0.5 lbs
United States
Florida
Concentric Reducing Ferrule--2\
Prices start at : 13.52 USD / each

Concentric Reducing Ferrule reduces from 2" to 1-1/2" tube and is 1-1/8" long.
  • Weight: 0.5 lbs
United States
Florida
Long Ferrule (Clamp/Weld)--2.5\
Prices start at : 12.80 USD / each

Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish. 1-1/8" long for 2.5" OD Tube.
  • Weight: 0.13 lbs
United States
Florida
2\
Prices start at : 0.70 USD / each

Rubber tri-clamp gasket for 2" OD tubing.
  • Weight: 1 lbs
United States
Florida
Thread Bevel-Seat Recessless Roll-On Ferrule--1.5\
Prices start at : 14.40 USD / each

Bevel-seat recessless ferrule for 1-1/2" tubing is 1-1/8" long.
  • Weight: 0.19 lbs
United States
Florida
White Flanged Gasket--2\
Prices start at : 2.45 USD / each

White Flanged Gasket for 2" S.S. In-Line Filter model MP2847A.
  • Weight: 0.25 lbs
United States
Florida
Tee (Clamp/Clamp/Clamp)-3\
Prices start at : 105.83 USD / each

Clamp end tee for 3" tube has A-dimension of 3-3/4" and B-dimension of 7-1/2".
  • Weight: 0.38 lbs
United States
Florida
1.5\
Prices start at : 21.04 USD / each

1.5" Blue Plastic Milk Valve features a 5/8" inlet.
  • Weight: 0.5 lbs
United States
Florida
90-Degree Sweep Ell (Weld/Clamp)--4\
Prices start at : 168.65 USD / each

90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other. Ell for 4" OD tube features "A" dimension of 8-5/16" and "B" dimension of 8-15/16".
  • Weight: 0.5 lbs
United States
Florida
External Ceramic Seal Kit f/LC Thomsen #4 Pump--OEM
Prices start at : 127.50 USD / each

External Seal Kit for LC Thomsen Model #4 Milk Pump includes head O-ring, 2 impeller clips, ceramic seal and rotary seal assembly. Original equipment kit.
  • Weight: 1.5 lbs
United States
Florida
Diverter Plug f/ 2\
Prices start at : 18.40 USD / each

Diverter Plug for 2" Glass Tee.
  • Weight: 0.19 lbs
United States
Florida
Tee (Clamp/Clamp/Clamp)-2\
Prices start at : 64.64 USD / each

Clamp end tee for 2" tube has A-dimension of 3-1/2" and B-dimension of 7".
  • Weight: 0.38 lbs
United States
Florida
180-Degree U-Bend (Weld/Weld)--3\
Prices start at : 136.58 USD / each

180 Degree butt-weld U-bend for 3" tube OD features "A" dimension of 9". Type 304 Stainless Steel.
  • Weight: 0.38 lbs
United States
Florida
90-Degree Bend (Weld/Weld)--1\
Prices start at : 22.96 USD / each

90 Degree tube bend for 1" tube OD features "A" dimension of 2.062". Type 304 Stainless Steel.
  • Weight: 0.5 lbs
United States
Florida
2\
Prices start at : 3.60 USD / each

Teflon Tri-Clamp Gasket.
  • Weight: 1 lbs
United States
Florida