Milk Line Washing Components Milking Equipment For Sale In Alaska

Shut-off plugs and parts available separately. 3" Wash Valve weighs 3 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks...

Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

Capacity, switch setting to program pump run time, hot and cold water valves, cycle timer and is CSA-approved. It may be combined with the 8950 Timer Control Module for more functionality.

This CIP Assembly for DeLaval and IBA features Drawer-Style Stainless Steel Jetter Rack and 120115 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Timer Control Module features electro-mechanical timing, failsafe timer, standard 8-minute wash cycle, 24-hour clock for automatic pre-sanitizing, door interlock and is CSA-approved.

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.

Diverter Plug for 2" Glass Tee.

Replacement pump tube with fittings, 8" piece."

Shut-off plugs and parts available separately. 2" Wash Valve weighs 2 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks...

Surge-Style Roll-On Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish. For 2" OD tube.

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends. Reducer from 3" OD to 2.5" OD tube is 3" long.

Long round wash and milk shut-off plug for 2" line.

Ceramic wear ring with Viton boot.

Surge-Style Roll-On Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish. For 1.5" OD tube.

This CIP Assembly for BouMatic features Stainless Steel jetter rack and 120117 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 2" OD tube features inner radius of 3" and center distance (C) of 3.5".

Rubber tri-clamp gasket for 3" OD tubing.

Hardware is included. CIP components are sold individually, or as part of complete kit. Stainless Steel Fit ‘em All Heavy Duty Jetter Rack will hold virtually any milking claw including Delaval.

Solid End Cap for Bevel Seat is made of Type 304 Stainless Steel with #4 Dairy Finish. End cap for 3" OD tube has 3.44" OD.

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends. Reducer from 2.5" OD to 2" OD tube is 2" long.

90 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 3" OD tube features inner radius of 4.5" and center distance (C) of 5".

Five-gallon pail. Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Silicone Grease (Required when replacing Peristaltic Pump Tubes) RFE Silicone Grease f / Peristaltic Pump Tubing.

45 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 2.5" OD tube features "C" dimension of 2-1/16".

Black Gasket, (top under slide) 9/16".

This high-quality butterfly valve for 2.5" tube is made of type 316 Stainless Steel for clamp connection. Not recommended for applications where pressure exceeds 150 psi.