Milk Line Washing Components Farm Supplies For Sale In San Diego

Long round wash and milk shut-off plug for 3a" line.

BUY BULK! FREE SHIPPING! Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

Intake orifice is 1-1/2". Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

Coburn"s S.S. Distributor Tee is smooth and clean throughout for efficient water flow. Tubes are aligned for ease and convenience of hose handling.

Use the Coburn stainless steel claw hanger whenever you need to hang a Delaval or other style claw upside-down. Ideal for storage and cleaning in place, this claw hanger includes hangar and U-bolt for installation on stall tubing.

This CIP Assembly for BouMatic features Stainless Steel jetter rack and 120117 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Hardware is included. Stainless Steel Fit ‘em All Jetter Rack will hold virtually any milking claw including Delaval. Jetter Rack is sold individually, or as part of complete kit.

Case of 4 gallons. Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Bender Diverter Valve - 120V

RFE Silicone Grease f / Peristaltic Pump Tubing. Silicone Grease (Required when replacing Peristaltic Pump Tubes)

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7102.

Shut-off plugs and parts available separately. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7100.

Part number "348-11" on schematic diagram.

90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other. Ell for 2" OD tube features "A" dimension of 4-1/16" and "B" dimension of 4-9/16”.

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7101.

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other. Ferrule for 1.5" OD tube is 1/2" long with 1.375" ID.

Thermometer registers from 1 to 220F and the face is 1" diameter with a 5" stainless steel stem. CIP Thermometer is used to make sure the CIP wash solution is at the required 160F degrees at the start of the wash cycle.

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends. Reducer from 2.5" OD to 2" OD tube is 3" long.

Heavy duty Drawer-Style Stainless Steel Jetter Rack includes nuts and bolts for mounting. Fits all claws including DeLaval.

Shut-off plugs and parts available separately. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

1-1/2" rubber gasket for Surge stainless steel pipeline.

This smooth, white Tee is made out of food-grade plastic.

Clamp end tee for 3" tube has A-dimension of 3-3/4" and B-dimension of 7-1/2".

When ordering pumps for other applications, please specify type of liquid to be pumped, gallons per minute, feet of head (the height to which liquid must be pumped), motor voltage, hertz, phase and shaft size.

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends. Reducer from 1.5" OD to 1".