Milk Line Washing Components Farm Supplies For Sale In North Carolina

RFE Silicone Grease f / Peristaltic Pump Tubing. Silicone Grease (Required when replacing Peristaltic Pump Tubes)

115VAC with drip-proof motor enclosure. Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately). 50-60 Hz, .31 amp. May be plumbed directly to the drain.

Long round wash and milk shut-off plug for 2" line.

Replaces Milk-Rite 7103. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

Tubes are aligned for ease and convenience of hose handling. Coburn"s S.S. Distributor Tee with vent hole is smooth and clean throughout for efficient water flow.

Stainless Steel Fit ‘em All Heavy Duty Jetter Rack will hold virtually any milking claw including Delaval. Hardware is included. CIP components are sold individually, or as part of complete kit.

Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted. Intake orifice is 1-1/2".

Replaces Milk-Rite 7101. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic.

High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion. Case of 4 gallons.

Long round wash and milk shut-off plug for 3a" line.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120116 Jetter Cups for Surge.

Bender Diverter Valve - 240V

Three-Pump Dispenser features three motor-driven peristaltic pumps each with 300 oz. Capacity, switch setting to program pump run time, hot and cold water valves, cycle timer and is CSA-approved.

Black Gasket, (top under slide) 5/8".

1-1/8" long for 2.5" OD Tube. Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish.

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other.Ferrule for 2" OD tube is 23/32" long.

Ell for 3" OD tube features "A" dimension of 6-5/16" and "B" dimension of 6-13/16”. 90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other.

Type 304 Stainless Steel. Butt-Weld-end Special Y for 1.5" tube OD features "A" dimension of 2-3/4" and "B" dimension of 5-1/2".

1.5" Blue Plastic Milk Valve features a 5/8" inlet.

Ferrule for 1.5" OD tube is 1/2" long with 1.375" ID. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other.

Ceramic wear ring with Viton boot.

Stainless Steel Nut for Blue Milk Valve.

Teflon bevel seat gasket for 1.5" OD tubing.

Type 304 Stainless Steel. 180 Degree butt-weld U-bend for 1.5" tube OD features "A" dimension of 4-1/2".

Ell for 1.5" OD tube features "A" dimension of 2-15/16" and "B" dimensionof 3-7/16". 90 Degree Sweep Ell is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on one end and butt weld on the other.