Milk Line Washing Components Farm Supplies For Sale In New Hampshire

4" Wash Valve weighs 5 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

Summit E Programmer is used to control the #1209838 Three-Pump Peristaltic Pump to automate and improve accuracy of dairy sanitation chemical dispensing. Programmer can set a variety of adjustments including on/off, run times and delay times from 1 second...

Heavy duty Drawer-Style Stainless Steel Jetter Rack includes nuts and bolts for mounting. Fits all claws including DeLaval.

CIP components are sold individually, or as part of complete kit. Stainless Steel Fit ‘em All Heavy Duty Jetter Rack will hold virtually any milking claw including Delaval. Hardware is included.

Wall or direct-mounted, air injector operates on 120 volts. Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

BUY BULK! FREE SHIPPING! Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

Short round wash and milk shut-off plug for 3a" line.

Use the Coburn stainless steel claw hanger whenever you need to hang a Delaval or other style claw upside-down. Ideal for storage and cleaning in place, this claw hanger includes hangar and U-bolt for installation on stall tubing.

Long round wash and milk shut-off plug for 2" line.

Long round wash and milk shut-off plug for 2" line.

This high-quality butterfly valve for 2.5" tube is made of 304 Stainless Steel for clamp connection. Not recommended for applications where pressure exceeds 150 psi.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion. Case of 4 gallons.

Butt weld end tee for 3" tube has L-dimension of 3-1/4" and B-dimension of 6-1/2".

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7100.

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends. Reducer from 2.5" OD to 2" OD tube is 2" long.

45 Degree Elbow is made of Type 304 Stainless Steel with #4 Dairy Finish and features standard clamp fitting on both ends. Elbow for 1.5" OD tube features "C" dimension of 1-7/16".

90 Degree tube bend for 1" tube OD features "A" dimension of 2.062". Type 304 Stainless Steel.

Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features threading on one end and butt weld on the other.Ferrule for 2" OD tube is 23/32" long.

It may be combined with the 8950 Timer Control Module for more functionality. Three-Pump Dispenser features three motor-driven peristaltic pumps each with 300 oz. Capacity, switch setting to program pump run time, hot and cold water valves, cycle timer...

Bend for 2" OD tube features "B" dimension of 2-5/16".Bend for 2.5" OD tube features "B" dimension of 3".Bend for 3" OD tube features "B" dimension of 3".Bend for 4" OD tube features "B" dimension of 4-13/16".

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Clamp end tee for 2" tube has A-dimension of 3-1/2" and B-dimension of 7".

Teflon bevel seat gasket for 1.5" OD tubing.

180 Degree clamp-end U-bend for 2.5" tube OD features "A" dimension of 7-1/2". Type 304 Stainless Steel.

Hardware is included. Stainless Steel Fit ‘em All Jetter Rack will hold virtually any milking claw including Delaval. The 120112 has rounded insert for holding the jetter cups. Jetter Rack is sold individually, or as part of complete kit.

Butt weld end tee for 2-1/2" tube has L-dimension of 3" and B-dimension of 6".

External Seal Kit for LC Thomsen Model #4 Milk Pump includes head O-ring, 2 impeller clips, ceramic seal and rotary seal assembly. Original equipment kit.