Milk Line Washing Components Farm Supplies For Sale In Nevada

Three-Jar Dispenser may be combined with the Timer Control Module to make a complete pipeline wash system. Jars have a capacity of 30 oz. Three-Jar Dispenser includes hot and cold water valves, 25 ft.

Short round wash and milk shut-off plug for 3a" line.

Ideal for storage and cleaning in place, this claw hanger includes hangar and U-bolt for installation on stall tubing. Use the Coburn stainless steel claw hanger whenever you need to hang a Delaval or other style claw upside-down.

Replaces Milk-Rite 7103. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

It may be combined with the 8950 Timer Control Module for more functionality. Three-Pump Dispenser features three motor-driven peristaltic pumps each with 300 oz. Capacity, switch setting to program pump run time, hot and cold water valves, cycle timer...

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic.

LEDs are added to help diagnose washer trigger supply issues. The module is versatile because it comes internally mounted in the box but can be removed to be used as an external module.

Diverter Plug for 2" Glass Tee.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion. Five-gallon pail.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for DeLaval and IBA features Drawer-Style Stainless Steel Jetter Rack and 120115 jetter cups.

110V Motor f/Depend-O-Drain

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120116 Jetter Cups for Surge.

Not recommended for applications where pressure exceeds 150 psi. This high-quality butterfly valve for 2.5" tube is made of 304 Stainless Steel for clamp connection.

Tubes are aligned for ease and convenience of hose handling. Coburn"s S.S. Distributor Tee is smooth and clean throughout for efficient water flow.

1-1/8" long for 2" OD Tube. Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish.

2-1/2" Wash Valve weighs 2.5 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

After-market equipment. External Seal Kit for LC Thomsen #4, 5 or 6 Milk Pumps includes housing gasket, rotary seal assembly, ceramic seal and 2 impeller clips.

Clamp end tee for 1-1/2" tube has A-dimension of 2-3/4" and B-dimension of 5-1/2".

Type 304 Stainless Steel. 90 Degree tube bend for 1" tube OD features "A" dimension of 2.062".

Type 304 Stainless Steel. 180 Degree butt-weld U-bend for 1.5" tube OD features "A" dimension of 4-1/2".

Coburn"s Black Plastic Distributor Tee is smooth throughout for efficient water flow and is an economical alternative to the Stainless Steel Distributor Tee.

Teflon bevel seat gasket for 1.5" OD tubing.

Wall or direct-mounted, air injector operates on 120 volts. Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

Type 304 Stainless Steel. Clamp-end Special Y for 2.5" tube OD features "A" dimension of 4-1/4" and "B" dimension of 8-1/2".

Teflon bevel seat gasket for 2.5" OD tubing.

Ferrule for 4" OD tube is 5/8" long with 4" ID. Short Weld Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish and features a standard clamp on one end and butt weld on the other.

Original equipment kit. External Seal Kit for LC Thomsen Model #4 Milk Pump includes head O-ring, 2 impeller clips, ceramic seal and rotary seal assembly.