Milk Line Washing Components Farm Supplies For Sale In Fort Worth

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7100.

May be plumbed directly to the drain. Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately). 115VAC with drip-proof motor enclosure.

Coburn"s S.S. Distributor Tee is smooth and clean throughout for efficient water flow. Tubes are aligned for ease and convenience of hose handling.

Coburn"s S.S. Distributor Tee with vent hole is smooth and clean throughout for efficient water flow. Tubes are aligned for ease and convenience of hose handling.

High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

CIP Thermometer is used to make sure the CIP wash solution is at the required 160F degrees at the start of the wash cycle. Thermometer has a recalibration feature and includes a plastic carrying case.

110V Motor f/Depend-O-Drain

The 120112 has rounded insert for holding the jetter cups. Stainless Steel Fit ‘em All Jetter Rack will hold virtually any milking claw including Delaval. Hardware is included. Jetter Rack is sold individually, or as part of complete kit.

Timer Control Module features electro-mechanical timing, failsafe timer, standard 8-minute wash cycle, 24-hour clock for automatic pre-sanitizing, door interlock and is CSA-approved.

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7103.

Summit E Programmer is used to control the #1209838 Three-Pump Peristaltic Pump to automate and improve accuracy of dairy sanitation chemical dispensing. Programmer can set a variety of adjustments including on/off, run times and delay times from 1 second...

Long round wash and milk shut-off plug for 3a" line.

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7101.

Coburn"s Black Plastic Distributor Tee is smooth throughout for efficient water flow and is an economical alternative to the Stainless Steel Distributor Tee.

Three-Pump Dispenser features three motor-driven peristaltic pumps each with 300 oz. It may be combined with the 8950 Timer Control Module for more functionality. Capacity, switch setting to program pump run time, hot and cold water valves, cycle timer...

BUY BULK! FREE SHIPPING! Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

This CIP Assembly for DeLaval and IBA features Stainless Steel jetter rack and 120115 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

This high-quality butterfly valve for 2.5" tube is made of 304 Stainless Steel for clamp connection. Not recommended for applications where pressure exceeds 150 psi.

Butt weld end tee for 4" tube has L-dimension of 3-7/8" and B-dimension of 7-3/4".

2" rubber gasket for Surge stainless steel pipeline.

Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish. 1-7/16" long for 3" OD tube.

Concentric Reducing Ferrule reduces from 2" to 1-1/2" tube and is 1-1/8" long.

Part number "348-28" on schematic diagram.

Clamp end tee for 4" tube has A-dimension of 4-1/2" and B-dimension of 9".

Butt weld bevel-seat ferrule for 4" tubing.