Milk Line Washing Components Farm Supplies For Sale In Florida

Intake orifice is 1-1/2". Wall or direct-mounted, air injector operates on 120 volts. Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

Replacement pump tube with fittings, 8" piece."

Bender Diverter Valve - 120V

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.

Short round wash and milk shut-off plug for 2" line.

Thermometer registers from 1 to 220F and the face is 1" diameter with a 5" stainless steel stem. Thermometer has a recalibration feature and includes a plastic carrying case. CIP Thermometer is used to make sure the CIP wash solution is at the required...

Stainless Steel Fit ‘em All Jetter Rack will hold virtually any milking claw including Delaval. Hardware is included. Jetter Rack is sold individually, or as part of complete kit.

Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

Short round wash and milk shut-off plug for 2-1/2" line.

Coburn"s S.S. Distributor Tee with vent hole is smooth and clean throughout for efficient water flow. Tubes are aligned for ease and convenience of hose handling.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

This high-quality butterfly valve for 2.5" tube is made of 304 Stainless Steel for clamp connection. Not recommended for applications where pressure exceeds 150 psi.

Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately). 115VAC with drip-proof motor enclosure. 50-60 Hz, .31 amp. May be plumbed directly to the drain.

Three-Jar Dispenser includes hot and cold water valves, 25 ft. Jars have a capacity of 30 oz. Three-Jar Dispenser may be combined with the Timer Control Module to make a complete pipeline wash system.

Butt weld end tee for 2-1/2" tube has L-dimension of 3" and B-dimension of 6".

Clamp end tee for 3" tube has A-dimension of 3-3/4" and B-dimension of 7-1/2".

Clamp end tee for 1-1/2" tube has A-dimension of 2.375" and B-dimension of 4.75".

Bevel-seat recessless ferrule for 3" tubing is 1-7/16" long.

This CIP Assembly for DeLaval and IBA features Stainless Steel jetter rack and 120115 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Includes 1 head O-ring, 2 impeller clips, 1 ceramic ring assembly and 1 carbon seal assembly. This kit is for the LC Thomson Model 5 Milk Pump. External Seal Kit.

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends. Reducer from 3" OD to 2" OD tube is 5" long.

Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish. 1-3/16" long for 2" OD tube.

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends. Reducer from 2.5" OD to 2" OD tube is 3" long.

Bevel-seat recessless ferrule for 2-1/2" tubing is 1-1/2" long.

Thomsen Milk Pumps have a well-earned reputation in the dairy industry for quality and workmanship. When ordering pumps for other applications, please specify type of liquid to be pumped, gallons per minute, feet of head (the height to which liquid must...

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends. Reducer from 4" OD to 3" OD tube is 5-1/8" long.

110V Motor f/Depend-O-Drain