Milk Line Washing Components Farm Supplies For Sale In Dallas

Jetter Rack is sold individually, or as part of complete kit. The 120112 has rounded insert for holding the jetter cups. Hardware is included. Stainless Steel Fit ‘em All Jetter Rack will hold virtually any milking claw including Delaval.

Silicone Grease (Required when replacing Peristaltic Pump Tubes) RFE Silicone Grease f / Peristaltic Pump Tubing.

Short round wash and milk shut-off plug for 3a" line.

Programmer can set a variety of adjustments including on/off, run times and delay times from 1 second to 45 minutes. Summit E Programmer is used to control the #1209838 Three-Pump Peristaltic Pump to automate and improve accuracy of dairy sanitation chemical...

Wall or direct-mounted, air injector operates on 120 volts. Improved Sentinel Air Injector activates at a minimum of 5" of vacuum, has a capacity of 200 cubic feet of air per minute on 15" of vacuum, and can be easily adjusted.

It may be combined with the 8950 Timer Control Module for more functionality. Three-Pump Dispenser features three motor-driven peristaltic pumps each with 300 oz. Capacity, switch setting to program pump run time, hot and cold water valves, cycle timer...

Bender Diverter Valve - 240V

2-1/2" Wash Valve weighs 2.5 lbs. High-quality stainless steel wash valves include two high-density polyethylene paddles, one short paddle which allows milk to flow into receiver, and one long paddle which blocks wash water.

Replaces Milk-Rite 7103. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

Fits all claws including DeLaval. Heavy duty Drawer-Style Stainless Steel Jetter Rack includes nuts and bolts for mounting.

50-60 Hz, .31 amp. May be plumbed directly to the drain. 115VAC with drip-proof motor enclosure. Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately).

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic.

Short round wash and milk shut-off plug for 2" line.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion. Five-gallon pail.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts. This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120116 Jetter Cups for Surge.

This smooth, white Tee is made out of food-grade plastic.

A complete pipeline washer may be made by combining the Timer Control Module with the 9740 Three-Jar or the 9590 Three Pump Dispenser. Timer Control Module features electro-mechanical timing, failsafe timer, standard 8-minute wash cycle, 24-hour clock...

Replaces Milk-Rite 7101. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

Stainless Steel Slide for Blue Milk Valve.

Type 304 Stainless Steel. 90 Degree tube bend for 4" tube OD features "A" dimension of 8-5/16".

For 1.5" OD tube. Surge-Style Roll-On Ferrule is made of Type 304 Stainless Steel with #4 Dairy Finish.

Reducer from 4" OD to 1.5" OD tube is 10" long. Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends.

Type 304 Stainless Steel. 180 Degree clamp-end U-bend for 3" tube OD features "A" dimension of 9".

Repair Kit contains 1 each VH1001 Carbon Seal, VH1002 Ceramic Seal, VH1003 O-Ring, VH1004 4" Gasket new-style and VH1011 4" Gasket old-style.

Thermometer has a recalibration feature and includes a plastic carrying case. CIP Thermometer is used to make sure the CIP wash solution is at the required 160F degrees at the start of the wash cycle.

2" rubber gasket for Surge stainless steel pipeline.

Fits up to 3" pipeline. Deluxe plastic-coated Pipeline Hanger includes two 4" clamps, two 2.5" clamps and two stainless steel clips.