Milk Line Washing Components Farm Supplies For Sale In Arkansas

Use the Coburn stainless steel claw hanger whenever you need to hang a Delaval or other style claw upside-down. Ideal for storage and cleaning in place, this claw hanger includes hangar and U-bolt for installation on stall tubing.

This CIP Assembly for BouMatic features Stainless Steel jetter rack and 120117 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Long round wash and milk shut-off plug for 2" line.

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120115 Jetter Cups for DeLaval and IBA. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.

115VAC with drip-proof motor enclosure. May be plumbed directly to the drain. 50-60 Hz, .31 amp. Drain valve assembly mounts directly to the wash vat drain fittings with a no-hub coupling (available separately).

Jars have a capacity of 30 oz. Of water hose, and sink bracket. Three-Jar Dispenser may be combined with the Timer Control Module to make a complete pipeline wash system. Three-Jar Dispenser includes hot and cold water valves, 25 ft.

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120116 Jetter Cups for Surge. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7103.

Long round wash and milk shut-off plug for 2" line.

Long round wash and milk shut-off plug for 3a" line.

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.

Thermometer registers from 1 to 220F and the face is 1" diameter with a 5" stainless steel stem. CIP Thermometer is used to make sure the CIP wash solution is at the required 160F degrees at the start of the wash cycle.

Replacement pump tube with fittings, 8" piece."

Bender Diverter Valve - 120V

This CIP Assembly for DeLaval and IBA features Stainless Steel jetter rack and 120115 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Of chemical tubing. The timer is easily programmed to deliver the precise amount of cleaner required for the pump, which in most cases is a very small amount. The Coburn Lobe Pump Wash System helps prevent the build-up of milkfat and other residues on...

Black rubber Duck Bill-style Drain Valve is used with CIP assemblies and moisture traps.

Five-gallon pail. Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends. Reducer from 4" OD to 2" OD tube is 8" long.

Butt weld end tee for 1-1/2" tube has L-dimension of 2-1/4" and B-dimension of 4-1/2".

Timer Control Module features electro-mechanical timing, failsafe timer, standard 8-minute wash cycle, 24-hour clock for automatic pre-sanitizing, door interlock and is CSA-approved.

Plain Recessless Ferrule for standard clamp is made of Type 304 Stainless Steel with #4 Dairy Finish. 1-3/8" long for 2.5" OD tube.

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and features butt weld fitting on both ends. Reducer from 2.5" OD to 2" OD tube is 2" long.

Bevel-seat recessless ferrule for 2" tubing is 1-5/16" long.

Butt weld end tee for 4" tube has L-dimension of 3-7/8" and B-dimension of 7-3/4".

Long Weld Ferrule is made of type 304 Stainless Steel with #4 Dairy Finish. 1-1/8" long for 2" OD Tube.

Concentric Reducer is made of Type 304 Stainless Steel with #4 Dairy Finish and featuresstandard clamp fitting on both ends. Reducer from 4" OD to 2.5" OD tube is 7-1/8" long.