No special tools required — just use scissors to cut the hoses to the sizes you need. Apply water just where you want it — and not where you don't. You can customize this convenient soaker hose system to suit your vegetable garden or any garden planted...
Hoses not included. Use Snip-n-Drip Angle Connectors to link additional raised beds to an existing Raised Bed Snip-n-Drip Soaker System or Original Snip-n-Drip Soaker System. Each connector pivots 180 degrees so you can position it as necessary to run...
✓ Coupler accepts both 1/2" Snip-n-Drip Garden Hose and 1/2" Snip-n-Drip Soaker Hose
✓ Link a Raised Bed to your existing soaker hose system
✓ Gardener's Supply Exclusive
✓ Pivots 180 degrees so you can position it at any angle
Then turn the knob to control water pressure. This water control valve allows you to adjust the water flow through your Snip-n-Drip system. Attach the coupler end to 1/2" Snip-N-Drip garden hose or 1/2" Snip-N-Drip soaker hose.
We've brought the efficiency and effectiveness of professional drip irrigation to home gardens! You get 50' of unobtrusive, small-diameter drip line that provides slow drip action, giving plants the deep watering they need to thrive.
✓ Includes pressure regulator
✓ ABS, polyethylene, polypropylene
✓ Drip irrigation saves time, saves water, and minimizes weeds
✓ Simple set up; provides consistent, efficient, root-zone watering
✓ Precise perforations at 1' intervals apply water to individual plants
Snap the fittings in place and you're ready to water. Apply water just where you want it — and not where you don't. The weeping action of soaker hoses delivers water right to the roots, with minimal loss due to evaporation and runoff.
✓ Set it up in less than an hour, leave it in place for easy watering all season long
✓ Includes 50' of 1/2" soaker hose, 25' of 1/2" garden hose, one faucet adapter, one quick-connect coupler, eight hose couplers and one end cap
✓ Gardener's Supply Exclusive
✓ Soaker hoses conserve water and keep foliage dry to minimize plant disease problems
Removing the end cap makes it easy to drain the system at the end of the season. Designed for use with our Snip-n-Drip Soaker System, these end caps are handy when you are customizing your system, or use them as replacement parts.
Kit installs in minutes. This complete kit includes six 24" high stakes that support young plants and make it easy to precisely place the six drip nozzles. Use scissors to cut the micro hose to the length you need, insert the drip nozzles and you're ready...
✓ Gardener's Supply Exclusive
✓ Control valve, end cap, faucet connector
✓ Stakes are 6mm in diameter x 24" H
✓ Includes 6 stakes to hold drip nozzles and support young plants
Simply cut the drip line to the lengths you need and arrange along rows, positioning the perforations to apply water to individual plants. We've brought the efficiency and effectiveness of professional drip irrigation to home gardens! This complete, customizable...
✓ Unobtrusive water line has precise perforations at 12" intervals
6 sturdy sprinklers with built-in ground spikes and 360° nozzles deliver water in full circles up to 14' in diameter and can disperse 1 gal. This efficient, water-wise system gives plants the slow, root-zone hydration they need to thrive.
✓ 1/2" menders with outlet (6)
✓ Assembly required
✓ PVC, coupling brass, ABS, polypropylene
✓ 1/2" connector
✓ Micro-sprinklers with full-circle, rotative nozzles (6)
Expand your Snip-n-Drip Soaker System with 25' of additional soaker hose. The 1/2" black soaker hose fits all our Snip-n-Drip fittings, sold separately.
✓ For use with our Snip-n-Drip fittings, sold separately
✓ 25' long
✓ Expand or add versatility to your Snip-n-Drip Soaker System
We've brought the efficiency and effectiveness of professional drip irrigation to your container garden! Potted plants need consistent water to thrive, but it's time-consuming to water by hand.
✓ Provides a slow, consistent supply of water to up to four planters
✓ Customizable, all-in-one system saves time, saves water and saves your plants!
✓ Easy, no-tools assembly
✓ Eliminates the hassle of dragging hoses and watering by hand
No special tools required — just use scissors to cut the hoses to the sizes you need. Apply water just where you want it — and not where you don't. Snap the fittings in place and you're ready to water.
✓ Perfect for Elevated Raised Beds and VegTrugtm Patio Gardens, too
✓ Kit includes everything you need!
✓ Gardener's Supply Exclusive
✓ Easily create an efficient and convenient watering system for your raised bed
Add drip lines to additional planters or replace lost parts from the Snip-n-Drip Pot and Planter Soaker System. Includes five micro 1/4" to 1/2" adapters and five micro T fittings.
Each angle connector pivots 180 degrees so you can position it at any angle. This kit allows you to water two raised beds from one Raised Bed Snip-n-Drip Soaker System, sold separately.
✓ Link an additional Raised Bed to your existing Raised Bed Snip-n-Drip Soaker System
✓ Raised Bed Snip-n-Drip Soaker System sold separately
✓ Plastic connectors, PVC hose
✓ Additional soaker hose sold separately
✓ Gardener's Supply Exclusive
✓ Couplers accept both 1/2" Snip-n-Drip Garden Hose and 1/2" Snip-n-Drip Soaker Hose
Removal of such particles allows for a better performance of all the following filters, such as Carbon Block or GAC filters. 50 of Melt-blown Polypropylene Sediment filters Sediment filter is often the first filter installed in the Reverse Osmosis circuit.
✓ Made of 100-Percent Melt-Blown Polypropylene, 4-layer filtration
✓ Pack of 50
Features: No additional features
Brand/Model Compatibility: Industry Standard Reverse Osmosis Systems
Excellent operating condition. John Deere Diesel engine with Berkeley Pump and side mounted Generator. No longer required as operating off a pressurized pipeline. Asking $11,000. Asking $11,000 OBO.
Bought new in 2012 and never used. New Berkeley B6EXQBM B70384 6x8 SAE3 Flanged D & S 1-1/2" - 10T 3" ext. Also have the B85410 Flywheel Coupler 11-1/2" clutch 13-7/8" OD 1-1/2" -10T
Well maintained ex-utility company equipment. 2004 Case 4391TA Hydraulic Power System designed for driving a water pump head. Can also be used to drive other hydraulic equipment, 4473 hours, strong running diesel.
Mullinax Irrigation Pump John Deere LP Gas Engine Serial# RG6076A515863 Model# 6706AFN30 Delivery available Mullinax Irrigation Pump John Deere LP Gas Engine Serial# RG6076A515863 Model# 6706AFN30 Hours 687 Pyro Alarm and Auto Shut Down Rockford PTO unit...
Flood tables with stands and reservoirs, pumps, analog timers, digital timers, two 20lb co2 tanks, co2 controller, high density 8 foot fluorescent banks, 2 foot fluorescent bank, ...
20 units of 1/4 mile wheel irrigation. Wheel irrigation removed from 250 acres of forage/row crops in Stanislaus county, California. $4,250 per unit or... $4,250 per unit or $80,000 for everything.
The DIG 90-Degree Fan Spray Jet Sprinkler offers a low-volume, water saving solution to water flower beds and ground cover. Comes assembled with a fan spray jet, a 13 in. Stake, a barb and 12 in.
✓ Constructed of UV-resistant plastic material Suggested operating pressure: 25 PSI
✓ 90-degree coverage for water dispersal over a large area
Keep your landscaping looking its best with DIG's 90° Spray Jets (10-Pack). Easily connects to 1/4 in. Micro tubing or 1/4 in. Slow application of water means less runoff and increased soil absorption.
Riser or sprinkler stake. This low volume sprinkler head is an efficient and gentle way to water flower beds. The control knob adjusts water flow and spray distance. Easily threads on a 1/4 in.
✓ For cold water use only
✓ This universal product works with most drip systems
Keep your landscaping looking its best with DIG's 180° Spray Jets (10-Pack). Easily connects to 1/4 in. Micro tubing or 1/4 in. Slow application of water means less runoff and increased soil absorption.
✓ Low flow with fine spray pattern
✓ Recommended micro sprayer spacing: 4 ft. to 8 ft. apart
✓ 2-piece micro sprayer consisting of a spray cap and threaded base for installation flexibility
✓ Operating pressure range: 15 to 30 psi
Irrigation System Component: Drip Irrigation Emitter
