Machinery Equipment For Sale In Torrente Valencia

5 Motorized conveyor roller between the veneer pack gluing machine and fanning machine - Pos. 3 Motorized conveyor roller, with selector switch (The guillotine operator places the veneer pack and indicates what splicing machine must receive it) - Pos.

Composed by: -PEELING LATHE 1600MM Working length 1600mm Working diameter 800mm Final log diameter once processed 70mm Working thickness from 0,5mm to 5mm Double telescopic spindle - OUTFEED CONVEYOR BELT - WINDING SYSTEM FOR THIN VENEER THICKNESS PRODUCTION...

- Unloading and stacking conveyor belt. Composed by: - In feeding conveyor belt measures 4,200x2,400mm - Hydraulic continuous hot press, platens measures 3,400x2,150 x 80mm, 12 cylinders 140mm diameter each.

45 mm Production Speed：approx. (depending on veneer strip thickness) Equipped with GLUIING UNIT and COOLING UNIT EC standards 350 mm Veneer Strip Width：min. Veneer Strip Thickness (depending on veneer condition)：approx.

Working width 4000mm 2 Floors 4 Drying sections 1 Cooling section

Upper board sanding machine 3 Heads Working width 1300mm New conveyor dragging EC standards

1 TOCCHIO electronic rotary guillotine of 2100 mm. 1 lifting table with pit for collection of cut folios. Width Year 2006 Electric cabinet and control desk.

Same equipment for the 2 machines: 1 infeed roller table 1 pressure rollers (O 50 mm) thickness control 1 CNC industrial screen 10,4" LCD-TFT screen: 800 x 600, CF Card 1 GB, Operation system: Windows Embedded Standard, execution with "Touch Screen",...

Thermojet - Novapress 6 Drying and ironing sections 1 Cooling and ironing section Working width 4200mm Screen drive system (Belt dragging without sprockets) Construction year 2002 Documentation EC standards

Model TI-600 M Working width 600mm Safety double push-button Safety photocell Safety rear jail EC standards Construction year 2001

Maximum working diameter 750mm (Automatic feeding) or 850mm (Manual feeding) End log diameter once peeled 95mm 2 Telescopic spindle Automatic thickness setting device Totally overhauled 3 months guarantee

- Driven rollers lift table, for finished board unloading, stacking and pack alignment. - Complete SUGIMAT Gas-oil boiler Sanding machine two heads. Composed by: - Lift table - Board pusher - Gluing machine - Disc conveyor - Board preparation table and...

Moulds press with high frequency generator Available also the moulds for sale From a public buildings equipment factory closed With emergency stop, mechanically and electrically overhauled

Semipress dryer 5 Sections Working width 4000mm Inox wire mesh belt in good condition

Composed by: 1 Two blades + double side gluing machine Monguzzi PULCHRA 45/3800 Year 2009 Equipped with screen, and video camera at machine rear side. Length 1 Hydraulic lift table with wheels

CPL/PVC/PAPER Working width 1.400mm Laminate with sheet or roll Year 2011 EC standards Good condition Composed by: - In feeding conveyor roller - Brush table - Top side glue spreader machine for Hotmelt (PUR/EVA/POLIOLEFINA) - Sandwich preparation table...

Working length 1800mm Working thickness 1 up to 3,5mm Maximum working diameter 750mm (Automatic feeding) or 850mm (Manual feeding) End log diameter once peeled 95mm Totally overhauled 3 months guarantee

Maximum log dimensions 800x800x4,000mm Maximum log weight 3,000Kg. Maximum working length 4,200mm Knife length 4,450mm Working thickness: 0.2mm (min) – 3.2mm (max) Cuts/strokes per minute 15 (min) – 90 (max)

SCARFING SAW Maximum length of veneer sheet 2700mm Minimum length of veneer sheet 1100mm Veneer thickness range 1,2mm up to 3,5mm Working speed 0,75m/sec JOINTING PRESS Maximum width of veneer 1650mm Minimum width of veneer 1100mm Pressing time 3-8 seconds

Roller conveyor Board in feeding device to preparation table Preparation table (The melamine paper is placed and the board is placed by driven troley) Press in feeding trolley MARZOLA Short cycle lamination hot press -Platens measures 2600x1400mm (For...

CREMONA 5200mm cutting length clipper machine. Composed by: - 2 pcs. CREMONA cross cut clipper machine - Tables for veneer bundles handling

Composed by: 1700mm peeling lathe equipped with debarker system Veneer conveyor belt Rotary guillotine Stacker

Composed of: - Driven conveyor roller for in feeding and board alignment - Longitudinal trimming unit - Board 90º turn device - Transversal trimming unit Veneered board trimming complete line, for veneered board overveneer remove, only the veneer not...

Working width 4.000mm 4 Drying sections 1 Cooling section Z screen path High performance Dismantled by experimented technicians, stocked in good conditions and protected.

Maximum cutting length 3600mm Maximum cutting with between knives 520mm Hydraulic EC standards Year 2007 Delivered revised, tested and ready to work Two knives, twin cut.

Model LAS 230 10 holes Platens measures 2300x1300mm With infeed conveyor EC standards Good condition

Working width 1300mm Working height 0 – 100mm 4 rollers Spreading rollers diameter 250mm Dosing rollers diameter 210mm Motor power 1,7KW Working speed 22m/min Worktop height 890mm Voltage 380V – 50Hz Automatic rollers clean up system EC standards