Machinery Equipment For Sale In North Carolina

Machine Specs : Feed speed: 10 to 40 MPM (32.5 to 130 FPM). Pre-gluing is done on RE/L-35 (see below). The "LMZ-1400" splices pre-glued veneer strips in order to achieve a fully closed solid glue splice line.

Saw carriage forward travel speed 16 - 164 FPM, return speed 164 PK-011177 Blade projection; 15 HP (11 kW) main & 1.5 HP (1.1 kW) scoring motor, 3,800 RPM main saw blade & 6,000 RPM scoring blade with external adjustment.

RAPID 2442RS GRANULATOR Used 24" x 42" Granulator 100 HP Motor (20) Rotating Knives (3) fixed Bed Knives Pneumatic Hopper Tilt Pneumatic Cradle Tilt Dual Fly Wheel 8" Discharge Mounted On Casters Emergency Stop Dimensions; 74" L x 68"W x 100"H Loaded...

Head Configuration : ● (2) Heads, (1) top and (1) bottom head directly opposed. Abrasive Planer, Top & Bottom 1,300 mm (52") working width capacity. ● 1,350 x 2,620 mm (53" x 103") abrasive belts.

With movable fence, 300 mm (11.8") main saw blade dia., 100 mm (3.9") scoring blade dia., max. Cutting height is 95 mm (3.7") at 90° and 67 mm (2.6") at 45°; 2- PS-011801 With scoring, 7.5 HP main motor with 1" dia.

1 HP feed motor with (3) feed speeds to feed chain with automatic chain lubrication. Part length 17-3/4" distance between saw & column, 50" long x 30" wide table. NORTHTECH SL-1000XL Straight Line Rip Saw 10 HP - 4,500 RPM Direct drive overhead mounted...

SPECIFICATIONS: 5 HP Feed motor with variable feed speed, 30 - 90 FPM Upper feed mat with round pin type spring loaded holddown fingers Gravity oiler PD-010664 Stock length (12" butt fed), 50 HP top & 40 HP bottom direct drive motors at 3,600 RPM, Carbide...

Specifications: Mi WM-010384 Enables automatic pneumatic positioning of the workpiece and features (2) saw units which are at an angle of 45° thereby cutting both glazing beads on both sides in a single working cycle.

Of (16) guns total. Includes:< FS-010682 2006 CEFLA ECOSPRAYER ROC 3D Automatic Spray Machine; CEFLA "ECOSPRAY ROC 3", 51" Width capacity. Features: CNC gun height adjustment; (2) finish material circuits, (2) belt driven reciprocating trolley carries...

This is a demonstrator machine with only 4 hours on the meter ! Head Sequence: Bottom 4 kW (5.5 HP), right & left 4 kW (5.5 HP), top 5.5 kW (7.5 HP), top 11 kW (15HP), bottom 4 kW (5.5 HP) motor.

The Clamp is activated once again to complete the box assembly. 1-1/2" - 15" Drawer height, 6" - 28" drawer depth, CF-011237 The operator loads a drawer front & pair of sides into the clamp, activates the clamping head with push button control; the jaws...

Crosscut at 45° is 93 mm ; inward or way from each other with positive stops at 45°, 90° & 45°. Complete with: SC-012456 Saw blades with 25.4 mm bore; both heads adjustable up to 2800 mm at 90° between centers on rack & pinion.

Mechanical readouts for pressure elements and chip breakers. All spindles equipped with mechanical digital readouts. Minimum wo MF-013265 Head sequence: Bottom 10 HP, right 7.5 HP, left 7.5 HP, top 15 HP and bottom 10 HP motor.

HOMAG BAZ 722 58/13/KC "GANTRY" CNC MACHINING CENTER (W/EDGEBANDING) + BARGSTEDT TBP 370/26/16 material handling system: Specifications: Working field (single panel); "X" Axis 5,860 mm (230"), "Y" axis 1,525 mm (60"), "Z" axis 300 mm (11.8"), max work...

Specifications: Maximum Load Size: Maximum load size 56" L x 56" MH-280280 All Wulftec structures are made of heavy-duty steel for rugged performance, even in the harshest work environments.

Northtech NT-610EL Top & Bottom Planer Capacities : 24" wide x 7.5" thick capacity; 1/4" minimum thickness; 12" minimum stock length Cutterheads : 25 HP top head; 20 HP bottom head; 5,800 RPM on cutterheads; (6) row spiral insert cutterheads, Carbide...

Part thickness 2.4" (60 mm). WEEKE BHX 055 CNC MACHINING CENTER (VERTICAL). Specifications: Flexible "Vertical" Machining Center that uses less than 5 meter² of valuable floor space in addition to an innovative panel handling system.

2nd Head: Rubber covered contact roll 12-1/2" dia. PLC proce SX-012246 (80-shore), 25 HP motor, 79 FPS (24 MPS). (30-shore), 15 HP motor 46 FPS (14 MPS). 3rd Head: Rubber covered contact roll 12-1/2" dia.

305 x 200 mm (12" x 7-7/8"). Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. Spindles: diameter 40 mm (1-9/16") with cutterhead speed at 6,000 RPM . SCM TOPSET MASTER 30 XL ...

Modular roller rear machine table, side aligning device for squaring ripped strips out to 59". Elect PK-011173 SELCO EB 70 CNC Front-Load Horizontal Beam CNC Panel Saw 126" (3,200 mm) Overall cutting length, 2.75" cutting height (80 mm saw blade projection).

Cutting height 5-11/16", hydraulic saw blade height & tilt adjustment by foot pedal control; cutting width between saw blade and rip fence 49". Complete wit PS-011800 MARTIN T-71 Sliding Table Saw Specifications: 10' Cutting cap., 3-position table locking...

Worktable: (12) Movable support rails with side mounted raise-and-lower panel feeding rails, (2) vacuum pods per ra BP-280503 Position speed: "X" & "Y" axis is 262 FPM (80 MPM), "Z" axis is 98 FPM (30 MPM).

The machine can apply hot melt glue to the back of roll form materials including paper, pvc, and veneer. ST 001) Bedframe composed of 3 sets 24 transport wheels of .6" widedriven by invertor with helicoidal gear transmission center fixed ST 014) Lip Head...

1: - BUTFERING Profiline SUR 213 RR - Bottom 2-Head , 1,350 mm (53") Width Capacity Wide Belt Sander; Pos. 2: - LIGMATECH - Powered roller conveyors for in- & outfee SX-012736 Top & Bottom Wide Belt Sanding Line with LIGMATECH Powered Roller Conveyors...

For pressing High Pressure Laminates (HPL), Backer Sheets, Wood Veneers! Flat-Belt Powered In-feed Layup Conveyor: (Not included) For laminate lay-up and loading of the press, foot pedal operated for automatic operat PF-010408

Welded steel bridge and base frame const RL-010698 Equipped with: (1) 10 HP COLOMBOATC spindle variable speed from 3,000 - 24,000 RPM, and 5-position bar style tool rack / tool changer .

Complete with EA 8 Panel Ionization Cleaning Mac SX-012738 HEESEMANN MFA 6 ... Wide Belt Sander with (4) Sanding Heads, (1) Brush Roller and EA 8 Panel Ionization Cleaning Machine 1,350 mm (53") max.