Machinery Equipment For Sale In Miechucino

- machine in stock - after a technical review - very good condition TECHNICAL PARAMETERS : - inlet dimension 210 mm x 310 mm - hopper dimension 1070mm x 890mm - hopper dimension 1070mm x 890mm - two pulling rollers - machine equipped with a reverse -...

- new stock - warranty and post - CE TECHNICAL PARAMETERS : - cutting length 1700 mm - 1200 mm width Cutting - cutting height 90 degrees - 85 mm - the sawing disc 45 degrees tilt - maximum diameter of the sawing disc 315 mm - maximum blade diameter 125...

- machine in stock - after a technical review - very good condition - year of production 2009 TECHNICAL PARAMETERS: - planing width 200 mm - planing height 120 mm 1 lower head 5.5 kW 2 head right 4 kW 3 head left 4 kW 4 upper head 5.5 kW - 40 mm spindle...

- CE certificate, - warranty and post-warranty service - new machine, in stock TECHNICAL PARAMETERS : - 350 mm chain width - cutting height 10 - 170mm - max. Length of the cut element 740 mm - table dimensions 1910 x 790 mm - number of revolutions 2600...

- in stock - after a technical review - very good condition TECHNICAL PARAMETERS : 1/ TABLE FEED - length of the table 500 cm - length of transverse strips 185 cm - five transverse ribbons - adjustable belt spacing - full speed regulation (geared motor)...

- machine in stock - typically to WET - generational machine - reinforced version with a double feed chain TECHNICAL PARAMETERS : - planing width 630 mm - planing height 150 mm on both sides - spindle height 120 mm - adjustable heads - electric height...

- machine in stock - after a technical review, ready to work - very good condition - year of production 2001 TECHNICAL PARAMETERS: - 950 mm working width - minimum working height 3 mm - maximum working height 160 mm - shaft diameter 180 mm - length of...

MOULDERS FESTO 5 - in stock - after a technical review - very good condition Technical parameters: - planing width 100 mm - planing height 100 mm - five heads - the last universal spindle - 30 mm spindle - maximum tool diameter 120 mm - 7520 revolutions...

DIRECT IMPORTER LOWEST PRICE GUARANTEE This model was created to meet the needs of professional and demanding users. Automatic lubrication. Precise and stable pressure diagonal straight edge.

- machine in stock - after a technical review - very good condition - for wet wood - year of production 1996 TECHNICAL PARAMETERS: - planing width 230 mm - planing height 160 mm - spindle diameter 50 mm - 11 kW lower spindle - 11 kW right spindle - 11...

- machine in stock - after a technical review - very good condition - year of production 2002 TECHNICAL PARAMETERS: - filling hole: 600 x 800 mm - 175 mm rotor diameter - 600 mm rotor length - total power: 18.5 kW - number of knives: 13 pieces - cutting...

- machine in stock - after a technical review - very good condition - production year 2000 TECHNICAL PARAMETERS: - filling hole: 600 x 800 mm - 175 mm rotor diameter - 600 mm rotor length - total power: 18.5 kW - number of knives: 13 pieces - cutting...

Machine in stock - After the technical review - A well-known reputable SCM brand TECHNICAL PARAMETERS : - Track width 220 mm - The width of the shaft is 210 mm - Shaft diameter 70 mm - Central lubrication of the caterpillar - Max saw diameter 350 mm -...

In stock - after a technical review - Construction year 2009 - with two adjustable piles automatically TECHNICAL PARAMETERS: - Track width 340 mm (Spikes) - Cutting width 310 mm Cutting height / saws adjustable: - without a 135 mm pressure roller - with...

- machine in stock - after a technical review - very good condition TECHNICAL PARAMETERS: - 22 kW main engine - 1.1 kW motor - 100 mm cutting heigh - track width 220 mm - adjustable feed rate on the motoreduceror 5.5 - 45 m / min - average diameter of...

- machine in stock - after a technical review - very good condition Technical parameters: - eight spindles - two-sided - four pneumatic vertical clamps - two pneumatic horizontal clamps - adjustable spindle spacing - extreme spindles regulated under the...

- Brand new - Warranty and service - in DTR - In stock !! TECHNICAL PARAMETERS : - Suction 6800 m3 / h - Engine power 5.1 kW (7.0 PS) - 400V / 50 Hz - suction system connection Wed.

- Machine in stock - After the technical review - Prepared for work - YEAR OF PRODUCTION 2008 - Planing width 20-230 mm - Planing height 8-150 mm - 40 mm spindles - Threaded spindles - Feed rate infinitely adjustable on the motor gear 4-32m / min - AUTOMATIC...

- machine in stock - after a technical review - very good condition - year of production 1995 TECHNICAL PARAMETERS: - planing height 160 mm - planing width 230 mm - six heads - 50 mm spindle - horizontal heads on steady Head layout: 1) horizontal lower...

- Machine in stock - After the technical review - Perfect condition TECHNICAL PARAMETERS: - Maximum cutting height 120 mm - Maximum cutting width 250 mm - Strong main 30 kW - 1.1 kW motor feed - Feed speed from 5 - 24 m / min - Maximum diameter of the...

- machine in stock - after a technical review - very good condition - year of production 2004 TECHNICAL PARAMETERS: - planing width 240 mm - planing height 140 mm - 40 mm spindle diameter - maximum diameter of 160 mm tools - arrangement of heads: 1) lower...

- machine in stock - after a technical review - very good condition TECHNICAL PARAMETERS : - 18.5 kW main engine - 1.5 kW hydraulic pump motor - 1000 mm rotor length - shaft rotation of 90 U / min - 295 mm rotor diameter - height of the 295 mm pressure...

- Machine in stock - After the technical review - Polish production machine - REMA TECHNICAL PARAMETERS: - Diameter of circular saw blades O 350 mm - Sawing heights 25 - 200 mm - Track width 420 mm - Electrically adjustable cutting height - Min.

2-sided planer REX U-41K - Year of construction 2004 - Very good technical condition - In stock, year 2004 TECHNICAL PARAMETERS : - Machining width 2 x 410 mm - Machining height 10 - 300 mm - Number of spindles 2 - Bottom-up spindle system - Spindle speed...

- Machine in stock - After the technical review - Very good condition TECHNICAL PARAMETERS: - Year of production 1998 - 15 kW main engine - Hydraulic pressure drawer - 730 mm rotor width - Rotor diameter 230 mm - Number of knives 38 pieces - Control cabinet...

Machine in stock - after a technical review - ready for work - The machine has a programmer for entering cutting parameters TECHNICAL PARAMETERS : - 2 rows of pawls - Track width 230 mm - Floating disc, automatically expandable with the possibility of...

- used, in stock - CE certificate - after a technical review - year of production 2008 TECHNICAL PARAMETERS: - 45 kW main engine - 1.1 kW motor - cutting height 170 mm - feed speed adjustable on the geared motor - maximum diameter of the blade 450 mm...