Machinery Equipment For Sale In Iscar

Brush veba model F350 occasion with drill group Machine composition • Motor from 3 hp to 380 v • Axis with 3 blades • Drilling group for splitting • Guide of 1,100 x 160 mm high tiltable • Table of 1,800 x 350 mm Regulation ce - Translated with...

• brush width of 240 mm • with independent motors • motorized lift of the height • long table of delivery • machine in very good condition • includes brushing heads Machine with cab protection and standard ce.

• Tilting guide from 90 ° to -45 °. Brush model kenbill 400 occasion Composition machine • table of work of 2,010 x 400 mm rectified • motor of 4 cv to 380 v. • guide measures of 1.110 x 160 mm.

- Upper exhaust fan. - 3 independent zones of ultraviolet lamps. - TOTAL LENGTH OF 2,500 MM - Motorized conveyor rollers with speed variator. DRYING "V" BARBERAN TL-20 LOW PRESSURE OF OCASSION TECHNICAL CHARACTERISTICS: - Structure of steel folded and...

Egurko profile line for doors composed of loader, swivel and unloader Sehitek - Translated with google

• standard ce • door inspection to access the hopper • dimensions 2.095 mm x 1.300 mm x 1700 mm weight 1250 kg - Translated with google • level switch to prevent loss of oil.

For more information contact us. CNC SAOM S25 numerical control, with tool change. - Translated with google

GENERAL CHARACTERISTICS - Height mx panel with straight edge 55 mm - Applicable edges in coils: fine and PVC up to 3 mm - Applicable edges in wood strips: solid wood up to 8 mm SYSTEM AND PANEL MOTION OPTIONS - Feed chain - Top with free rotating wheel...

- useful drag width 320 mm - main motor 50 hp at 380 v - electronic gearbox drive motor 3 hp and 5-25 m / min - max. Technical characteristics: - crawler track system. Diameter saws 350 mm - cutting height max 120 mm - anti-splinter system Upper and lower...

Used railing for paneling Working groups: - lower crawler chain drive and upper idler wheels - rake motor with vertical / horizontal inclination This machine is special for grooving and inserting of rubber weatherstrip in automatic.

- Tilting upper and lower trim groups. Clapper of edges with calderin of cola mark cehisa series 200 mod. Regulations - Translated with google - Group tupis of entry to review board - Group Nº2 cutting discs.

SALVADOR TDO250 OPTIONAL MACHINE OCCASION • ROLLS TO CARPET IN ENTRY. • CUTTING SECTION: MIN MM 30X15, MAX MM 230X75 • MINIMUM LENGTH OF THE BOARDS BEFORE CUTTING MM 500, MAX MM.

Brb-2-1400-l / rr occasion, year 2006 Technical characteristics: Nominal width 1400 mm Right hand side Working height 900 mm Dosing roller or 174 x 1415 mm Applicator roller or 245 x 1415 mm Retreading qualities: gray butyl, 60 sh (nt-25) gray butyl 40...

Drilling machine tomassini mod tecnica 29 Technical features: - motor 4 hp to 380 v - pneumatic inclination - 3 pneumatic drums - 29 drills. - Translated with google

- Translated with google With heating to Boil electric. Press Orma Mod. NPC 3500 measures work 3,500 mm x 1,300 mm of 1 hole.

First phase of preassembly and sliding table inside the press Second pressing phase (during the time programmed by means of the timer) Extraction of furniture after the time of pressing - Voltage at 380 V 3 Ph, working pressure 0-10 kgrs / cm2

All settings are made manually. Separation between milling cutters without stepping from 32 mm to 100 mm. Pp 2-32 / 100 used Pneumatic milling machine Standard version with solid cast iron base and wide table at a comfortable working height.

• No. 2 horizontal hydraulic pistons. • useful working width of 3,500 mm • working height of 2,500 mm. • controls on the left side. • 3 hp motor at 380 v. Mm. • nº3 vertical bars with 3 hydraulic pistons.

Working height: 120 mm. Weinig Unimat Molding Machine 22. - Translated with google Working width: 220 mm. Shafts 8 + 1 universal shaft. Working speed: up to 36 m / min. Pneumatic pressure.

• # 2 pneumatic clamping parts. - Translated with google • 4 working speeds 3000/6500/8000/1 rpm. • engine of 7.5 hp at 380 v. Tupi copier model copi 200 occasion Composition machine • working table of 1,500 x 900 mm • maximum length of...

DIMENSIONS OF THE PALENES (DIMENSIONS OF WORK): - Length Min mm 140 / Max mm 3200 - Width Min mm 20 / Max mm 900 - I expect Min mm 10 / Max mm 80 WORK GROUPS: - No. 1 vertical spindle ER32 (KW 4,5) with reverse (up to 18000 RPM) - No. 1 Circular saw (for...

Wadkin nv300 brand corrugating knife sharpener - Translated with google

(Mm) 635 Main motor power (hp) 5 Motor power feed tapi (hp) 1/4 Diameter sanding rollers (mm) 150 Max working height (mm) 100 Dimensions of the table (mm) 635X870 Avbance tapestry speed (mts-min) 3,7 rpm Sanding rollers 1,700 Weight kg 420 Machine dimensions...

Drill bit used imara Technical features: - Horizontal chuck number 19 x 1 combs - Number of vertical drill chucks 19 x 2 combs - pitch height 80 mm. - maximum drilling depth 70 mm - power of each vertical motor 1,1 kw 2 units - power of each horizontal...

TECHNICAL CHARACTERISTICS: - Structure in steel casting. - 3 Cv motor for main shaft. - Automatic duty cycle - Maximum width of 750 mm. - EC regulations - Translated with google

Technical sizing - 970 mm working width - banding development 1,900 mm - 1st group working hard roller calibrator 90 sh diameter 160 mm - 2nd group working medium sanding roller 60 sh - Translated with google

Band saw Beneta Mod Venus for curved and straight automatic with table output pieces. - Vertical axis X 1600 mm - Vertical axis Y 450 mm - Maximum speed axis X 50 mts / min - Maximum speed Y axis 50 m / min - Total installed electric power 6.5 KW - Maximum...