Lumber Wood For Sale In New Mexico

These completely waxed blanks are freshly cut and wax sealed. Twice turning is the recommended method for drying. Rough corner edge and minor surface checks may be present on some pieces while longer pieces may have a slight crown up to 3/16”.

From equatorial western Africa, Zebrawood (Microberlinia brazzavillensis) is usually logged by hand with a hundred men or more on mountain slopes. Before the first limbs. Uses include: furniture, cabinets, architectural applications (veneer), turned articles,...

Khaya/African Mahogany is a beginner friendly wood which is easy to turn! Similar to other Mahoganies, this species works easily and has rich, warm colors. Ready to use! This piece would be ideal for instruments.

Some shrinkage/movement/checking will occur. Expect some shrinkage/movement/checking during drying. Checks, cracks, incursions, pin holes, and other natural defects may be present or occur over time.

Very clean and beautiful with shimmering iridescence, you’ll love the contrasting lines and color in each board! The density of this species is similar to African Bubinga. Amazique has great durability and workability for any of your projects! It is...

Occasional piece may have some residual moisture. Each piece is labeled with the species name. Today, Ceylon satinwood is a rare wood that is used for period reproduction furniture and is priced dearly, especially for figured stock.

A few minor surface checks are present as well. Kiln dried and surfaced on two sides, this immaculate material is ready to use in your fine projects! The ribbon figure that exists in most pieces is caused from interlocked grain in quarter sawn boards.

This is a great species for turning projects. You will enjoy the very aromatic, clean, crisp fragrance if you work this material! This is salvaged material from previous logging that occurred from 1940-1960.

This is the best Figured Oak we have seen since our Dyer Oak! Rough corner edge on back face. It is kiln dried, surfaced on two sides, and ready for use! This quarter to rift sawn Figured White Oak is kiln dried, surfaced on two sides, and ready to use.

Fabulous iridescence is present in all boards. It is a double knife blade. This piece is quarter to rift sawn and has a great figure! Beautiful figure will vary from board to board.

This is a high class wood that is worthy of many uses! It is very similar to Hawaiian Koa in color, density and acoustic properties. It is very stable and easy to work. One of these is 1/2" thickness, the other is 9/16".

Turquoise, the robin's egg blue gemstone worn by Pharaohs and Aztec Kings, is probably one of the oldest gemstones known. High quality machined steel for precision turning. Turquoise has been, since about 200 B.C., extensively used by both southwestern...

It takes a fine, smooth natural polish. The wood is ideally suited for cabinets, flooring, tables, boxes, and other fine articles. This piece does have a 1/8" twist and a 1/8" bow at numbered end.

Must be able to work with! This is some of the best Box Elder Burl we've cut in years! A range of creamy orange and vanilla colors mix with pink and red streaks through burl and figure, truly setting this wood apart.

It's a rare treasure that is seldom available! Dry and ready to use, this stunning material has vibrant pink to golden color with some curly grain in select pieces. Dry and ready to use, this stunning material has vibrant pink to golden color with some...

Easy to turn, these blanks are sure to please! The great workability and nice polish in this wood make it a great choice, not to mention the warm aged golden honey to red color. Sawdust and superglue will fill in the gaps.

These exist mostly in the pieces that have live edge and larger incursions. It is milled on two faces. There are pink and blue colored hues. There are many exceptional pieces available! The color spectrum ranges widely from varying shades of blue to golden...

The Marblewood in this special was selected from the cleanest lumber and highest figure available. It is the nicest Marblewood lumber that we have been able to obtain since 1999! All boards are kiln dried, surfaced on two sides, and 99% free of checks/other...

It is nice clean material. Kiln dried and ready to use! This piece has great color and figure! It is partially air dried and wax sealed. This piece is ideal for guitar sides, ukuleles, or other high end uses.

Enjoy this quality material, no two pieces are alike! This turning material is a mix of curly figure and heavy Ambrosia streaks that provide contrast and and color for projects that will really stand out! It is kiln dried and surfaced on two sides.

This piece has great color with several 1" checks present on the edge. As this ages and picks up UV light it will turn a purple color, usually within a couple of days. Air dried for 2 years as of September 2017.

Myrtle is one of the best project woods around! You'll love the easy workability and finishing of this unique hardwood. Kiln dried and surfaced on both sides, this lumber offers great quality for your dollar! This piece has great color and figure! Kiln...

May contain some residual moisture. The black in the photos are just on the surface and will easily turn away. Nice violet purples. These are all fresh cut and wax sealed. As this ages and picks up UV light it will turn a purple color, usually within...

From the Atlantic forest in Brazil, Kingwood has been the wood of Kings for hundreds of years in France, England, and Europe. Ships inside the USA only. We will more than likely not be able to replace this inventory so for the best selection shop now!...

This piece is kiln dried and ready to use! This piece is kiln dried and ready to use! It has rustic live edges and soft spots. This piece can be used for a peppermill or shotgun/rifle forend.

This beautiful and sought after material has been kiln dried and is surfaced on two sides. You must be able to work with the natural properties of this piece. There are a few pin holes in this piece.

These are nice clean boards that would be perfect for your upcoming project! Sizes may vary by ?”. This piece is quarter to rift sawn. There is a 1/2" incursion below the numbers.