Livestock Waterers Farm Supplies For Sale In Worcester

Water pressure and 375 gallons per hour capacity. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Anti-siphon feature makes this valve approved for Grade A dairy farms.

Control Diaphragm w/ ABS Stem & Strainer

Highly recommended for ALL cold climate installations. The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect the water line from freeze ups.

Trough-O-Matic Float Valve Repair Kit

Very efficient use of energy. The polyethylene used in our SPI Livestock Waterers is FDA and HPB approved, food grade, recyclable plastic. The VS15E is constructed as a sturdy double walled foam-filled (polyurethane insulation) unit.

A brass rod float arm 1/4" x 5" with threads on each end. Connects valve to 301 round float.

The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin. It moves the plunger to and from the orfice.

SPI foamed 4x4 energy free waterer door only.

Guaranteed for 1 year & SAFE IN PLASTIC. Custom made to use in all Rubbermaid stock tanks with 1500 Watts of power. Thermostatically controlled to only run when necessary. Easy to install & installs in only minutes.

Foam insulation between walls has an R-value of 7.14". Optional wing bolts are available for Grade A inspections. Weather strip & an insulated sleeve for the supply line come with each unit.

Valve 36" Float Cord Only.

Float Arm for the Mira Fount M3360, M3410, M3410-4, M3465 waterer.

SPI 351/352 New Generation Gasket.

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. The Tru-Test Apex Xtraflo 3/4" Trough Valve Long Tail is a full flow - diaphragm activated, armless, self-cleaning valve mechanism, with a longer valve end.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

Pride of the Farm Rubber Diaphragm that fits between the orifice & the plunger on a VP124 valve. #6 on breakdown.

#12-2 on the breakdown. This part number is for the arm only & is usually used on hog troughs. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

A drain plug for Arkfeld waterers - 2" in size - Cork.

3/4" orfice only for the inside of a Franklin Valve.

Valve works with up to 70 lbs. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. The rust-proof plastic case comes with an adapter to fit a 3/4" male or 1/2" female pipe.