Livestock Waterers Farm Supplies For Sale In Winston Salem

SPI foamed 4x4 energy free waterer door only.

The case is made out of a rust-proof plastic and comes with an adapter to fit 3/4" male or 1/2" female pipe. Water pressure and 375 gallons per hour capacity. Anti-siphon feature makes this valve approved for Grade A dairy farms.

This white pin holds the upper arm to the top base.

Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long tail length. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

Connects valve to round float. A brass rod float arm 1/4" x 1" with threads on each end.

Useful for feeding or watering rabbits, poultry or any type of small animal. Capacity is one-half pint (1 cup). Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage.

The orange cap only that fits over the insides of the Franklin Valve.

3/4" orfice only for the inside of a Franklin Valve.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

600 watt x 240 volt heating element only. Arkfeld waterer element replacement.

SPI 90 degree elbow for all models.

Connects valve to 301 round float. A brass rod float arm 1/4" x 5" with threads on each end.

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

3 year warranty. The tank also comes with a 1.25" drains installed. All edges have been rounded for safety & strength. Aqua Blue color only. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks.

#7 on breakdown. It has O'ring on one side & a Diaphragm on the other (not included). Pride of the Farm 5/32" Orifice on a VP124 Valve.

It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close. Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI.

Continuous flow disc and repair kit for use with Hudson valves.

PVC pipe from valve to hose threads. Contains J-bolt brackets which mount to tank edge.

Connects valve to 301 round float. A brass rod float arm 1/4" x 6" with threads on each end.

Water line entry on either side with 1/2" brass fitting. Powder coated, anti-bacterial steel bowl has non-siphoning float to maintain constant water level. Use for horses, sheep, calves and other livestock.

Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute. The Megaflow is compact, robust and manufactured from non-corroding materials.

Replacement Low Pressure Valve for Miraco waterers.

Trough-O-Matic Float Valve Repair Kit

Heater included: 250 watts, 110 volts. Four recessed anchor notches for secure installation. The cavity can be used to make the connection from the supply line to our valve. The bottom has a cavity for warm climate installations only.

SPI 4x4 Rubber Drain Plug only.

Thermostat ONLY for all Johnson Concrete Waterer Models.

Pride of the Farm Element for electric waterer units.