Livestock Waterers Farm Supplies For Sale In Wilmington

Hollow black plug used in all Franklin galvanized waterers.

SPI white corrugated baffle for model 4x4 energy free waterer.

This piece is held by two thumbscrews not included in this part. 3" orange arm that fits between the lower arm and the float connect.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

Aqua Blue color only. Dimension: 50" x 33 1/4" x 24 1/4" If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

#5 on breakdown. Pride of the Farm Plastic Plunger that fits directly into the VP124 valve body & the rubber diaphragm.

Mostly used on Franklin hog waterers. Orange plastic valve assembly fits a 3/4" FPT with a 1/2" orfice inlet.

Valve works with up to 70 lbs. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. Anti-siphon feature makes this valve approved for Grade A dairy farms.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

It moves the plunger to and from the orfice. The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin.

Rugged plastic housing is molded from high-grade polystyrene. Attaches to standard ¾” garden hose. Trough-O-Matic Stock Tank Float Valve with Plastic Housing flows up to 245 gallons per hour and operates between 10-70 psi.

A drain plug for Arkfeld waterers - 1 1/2" in size - Cork.

Connect valve to 301 round float. A brass rod float arm 1/4" x 4" with threads on each end.

This round barrel-shaped tank holds 35 gallons of water. A great new way to haul additional water for your animals in your trailer or in the back of the pickup.

This repair kit fits the Models 101, 202 & 404 with or without heat.

Seamless sidewall cannot leak. Foam insulation between walls has an R-value of 7.14". The WPM10 is an extremely rugged 2 door opening, energy free unit for hogs. Livestock can drink out of both flaps at the same time, not always so with a ball closure.

Two Year Warranty High Volume - 2400 GPH at 40 PSI Animal Damage-Resistant Design No Float Ball or Moving Parts Unaffected by Freezing Hudson Valve for 1-140 PSI with 1/2" female thread is 5" high and 3" in diameter.

Turns on at 36 degrees and turns off at 48 degrees. Often used in Franklin & Arkfeld waterers. Surface mount thermostat used in galvanized waterers.

Working pressure range is 4-175 psi, working water temperature range 34-140 F. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

21.75" W x 28" L x 16" H No more rust or corrosion! These electric waterers are built of a polyethylene construction creating a strong corrosion free product to provide many years of trouble free operaton.

Measures 37” x 27 1/2” x 13”, ash grey color. 5-year warranty. 35-Gallon Water Tank, small enough you can tip over to drain (does not have drain plug).

Robert's Brass thumbscrew that connects the short arm and long arm.

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

Great value & great features don't have to come in a boring, boxy profile. (30 years of use) 2" built in drain, overflow port can be used either as an internal drain or it can be used for optional continuous flow operation, rugged notches for secure anchoring...