Livestock Waterers Farm Supplies For Sale In Warren

XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. The top entry model provides an air gap, preventing back-flow.

SPI 351/352 New Generation Gasket.

A brass rod float arm 1/4" x 8" with threads on each end. Connects valve to 301 round float.

Screw that holds the float connect to the top of the float.

SPI foamed 4x4 energy free waterer door only.

Valve 36" Float Cord Only.

3/4" male to female hose used to hook up the water line to the waterer.

Plastic piece that sits on top of the float. It is held by a float screw and connects on to the bottom of the float arm.

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch...

Use this valve assembly with the J303 with without heat.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

Sloped bottom for easy clean-out. Removable dome for quick and easy access to valve area. 30.5” x 16.5” x 27” tall. 19” drinking height. Resistant to corrosion. Has 2” to 3” urethane foam insulation.

The unique design includes a 25-gallon water capacity (FDA approved) combined with a large storage compartment and durable lid construction for use as a step. Multiple purpose water caddy is an ideal space-saving solution for easy trailering.

Robert's 3/4" leather cup ring that fits on the brass plunger.

Apex replacement float with string included.

The cavity can be used to make the connection from the supply line to our valve. Easy access to valve and heater. Water horses, calves, wildlife with Performance One model WP06 . Simple water level adjustment, easy to clean.

Thermostat ONLY for all Johnson Concrete Waterer Models.

Corrugated design provides rigidity without bulk when back filled with earth. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

A typical winter heating bill of $10.00 or less! Why? Molded with the most effective ultraviolet inhibitor. 100% poly construction. Tough enough for years of outdoor use. No loose parts to lose.

This repair kit fits the Models 101, 202 & 404 with or without heat.

Thermostaically controlled to only run when necessary. Protective cage permits use in all tanks. Guaranteed for 1 year & SAFE IN PLASTIC. The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple...

This drain plug fits Models 101, 202, 303 & 404 with or without heat.

Provides just the right height to fill buckets without a hose. Includes storage compartment. Not compatible with 39 Gallon Upright Water Caddy (36960) or 18 Gallon Water Caddy (34021).

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

This unit fits the Model 101, 202 & 404 with or without heat.