Livestock Waterers Farm Supplies For Sale In Tulsa

SPI 351/352 New Generation Gasket.

This piece is held by two thumbscrews not included in this part. 6 1/2" orange arm that fits between the lower arm and the float connect.

Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies. Water circulation is a assisted with our patented baffle design and discharge ports. 70 Gallon Open Trough Tank offers more features.

3/4" orfice only for the inside of a Franklin Valve.

The valve has a 1” water level differential between opening and closing, reducing pump motor overload. XtraFlo is UV stabilized and corrosion resistant. Fully submerged valve is almost indestructible to livestock and models come in standard tail length...

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

Unlike common ball float valves, the Hudson Valve does not constrict the flow prior to positive shut-off. Fluid level forces the float to rise and close the diaphragm chamber, which expands to stop incoming flow.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Connects valve to 301 round float. A brass rod float arm 1/4" x 6" with threads on each end.

Robert's Brass thumbscrew that connects the short arm and long arm.

Connects valve to 301 round float. A brass rod float arm 1/4" x 8" with threads on each end.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

Inside repair kit for Topaz & Megaflow Valve.

Includes screen, retainer ring, diaphragm, shut-off pad and float. Repair Kit for 716H Valve.

All edges have been rounded for safety & strength. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. Aqua Blue color only.

Topaz Float Valves are ideal for filling tanks where mounting above the water is preferred. They are made for tanks which have the valve mounted above or below the water. The Topaz is compact, robust and manufactured from non-corroding materials.

Float Arm for the Mira Fount M3330 waterer.

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

Extra supply line protection, patented water circulation, multiple constant flow and drain options. 70 Gallon Open Trough Tank offers more features. More drinking length. There are no loose parts, Lower access panels on each end.

#10 on breakdown. Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body.

Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. Corrugated design provides rigidity without bulk when back filled with earth. Won't rust, resists rot & holds up to chemically active soil conditions.

It moves the upper to and is also held by a thumbscrew to the float arm. The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

This unit fits the Model 101, 202 & 404 with or without heat.

Great value & great features don't have to come in a boring, boxy profile. 250W heater, 2" built in drain, overflow port can be used either as an internal drain or it can be used for optional continuous flow operation, rugged notches for secure anchoring...