Livestock Waterers Farm Supplies For Sale In Trois Rivieres

It is loaded with features not available on any competing trough drinker. Water circulation is a assisted with our patented baffle design and discharge ports. Backed with the strongest warranty available.

The VS15E is molded from a polyethylene construction creating a strong corrosion free product to provide many years of trouble free operation. Meets "Grade A" Dairy requirements (non-siphoning).

The case is made out of a rust-proof plastic and is fitted for a male 3/4" threaded hose. Anti-siphon feature makes this valve approved for Grade A dairy farms. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage.

Thermostaically controlled to only run when necessary. Guaranteed for 1 year & SAFE IN PLASTIC. Protective cage permits use in all tanks. The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple...

Float Arm for the Mira Fount M3360, M3410, M3410-4, M3465 waterer.

Red octagon plunger that fits inside the Mira Fount cattle waterer RED valve.

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.

The top entry model provides an air gap, preventing back-flow. Working pressure range is 4-175 psi, working water temperature range 34-140 F. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long...

Unaffected by ground movement due to freezing & thawing. It will take abuse! Won't rust, resists rot & hold up to chemically active soil conditions. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

Blue plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers.

A brass rod float arm 1/4" x 4" with threads on each end. Connect valve to 301 round float.

Filter replacement for Topaz & Megaflow Valves.

VP2 Valve Upgrade Kit for 1/8" Orifice Valve

The Jug Basic Float Valve fits Models J101, 202, 303 & 404 with or without heat.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

White styrofoam round disc float only.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close. It's design reduces stock damage and minimizes blockage.

This bolt package is for Models 101, 202 & 404 with or without heat.

SPI hatch cover for model 4x4 energy free waterer.

No other parts are included with this Power Link. Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm. #1 on breakdown.

Compartment measures 20” long x 11 ½” wide x 4” deep. Overall dimensions - 35 1/2" long x 16 1/2" wide x 15 1/2" tall. Tank features pull plug and vent for easy filling. The unique design includes a 25-gallon water capacity (FDA approved) combined...

Thermostatically controlled to only run when necessary. Constructed of Cast Aluminum for ultimate effiency & safety. This donut shaped 500 Watt De-Icer is designed for multiple uses around the farm.

The top entry model provides an air gap, preventing back-flow. Working pressure range is 4-175 psi, working water temperature range 34-140 F. Fully submerged valve is almost indestructible to livestock and models come in standard tail length and long...

SPI 2 1/2" Brass Short Float Stem only.