Livestock Waterers Farm Supplies For Sale In Topeka

Replacement Plastic Valve & Float f/ WFD85 and MFD85 field drinkers.

A brass rod float arm 1/4" x 7" with threads on each end. Connects valve to 301 round float.

Pride of the Farm Element for electric waterer units.

Water pressure and 375 gallons per hour capacity. Valve works with up to 70 lbs. The case is made out of a rust-proof plastic and comes with an adapter to fit 3/4" male or 1/2" female pipe.

Valve installs in any type of tank up to 1/2" wall thickness. The Valve mounts in any type of tank at approximately 4 to 20" below the desired water level where it operates with a simple reliable design requiring no floats, rods or guards.

Repair Kit for 716H Valve. Includes screen, retainer ring, diaphragm, shut-off pad and float.

Features heavy duty anti-chew protector. Constructed of Cast Aluminum for ultimate efficiency & safety. Ideal for use in Ponds 50 to 600 gallons. Guaranteed for 3 years & SAFE IN PLASTIC, rubber liners or concrete.

White styrofoam triangular disc float only.

Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm. No other parts are included with this Power Link. #1 on breakdown.

Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water...

The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper arm and is also held by thumbscrew to the float arm.

A great new way to haul additional water for your animals in your trailer or in the back of the pickup. This round barrel-shaped tank holds 35 gallons of water.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

This Dare anti-siphon farm tank float valve with aluminum housing has a 300 gallon per hour capacity and a tough blow-molded plastic float. Connects to 3/4" garden hose or adaptable for pipe.

Robert's Brass 1/2" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. This model features an adjustable short arm for customizing water level.

Constructed with FDA-approved materials, with a vent in the fill cap on top of the caddy. 14” side panels x 14.5” front panel x 72” tall. 3-year warranty. Comes standard with two shut-off valves, one for hose and the other for filling a bucket.

Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers. It measures 3.25" x 4.25" x 2.38".

Inlet pipe thread is 1/2" male and 1/4" female. Valve seat rotates for extended life. Overall length is about 6". Float and arm are molded of high-impact styrene and the valve body is made of Delrin.

Weather seal is for Models 101, 202 & 404 with or without heat. The 101 model takes 1 kit, the 202 & 404 needs 2 kits.

Robert's 3/4" leather cup ring that fits on the brass plunger.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

The Jug Basic Float Valve fits Models J101, 202, 303 & 404 with or without heat.

A brass rod float arm 1/4" x 8" with threads on each end. Connects valve to 301 round float.

Sealed bottom keeps out moisture & rodents. Seamless sidewall cannot leak. Stainless steel bolts & removable top afford easy access to plumbing. No heat well needed; use an 8-12" tile; can be fitted on most existing pads.

Eliminates algae problems as water is not exposed to sunlight. Frame and cover are made of high impact Rock-ite. Water enters the MiraFount at 45 to 48 degrees. University testing showed that the fountain worked when temperatures were at -100 degrees...

SPI foamed door only. Specify model 354, 352 or 351 energy free waterer.