Livestock Waterers Farm Supplies For Sale In Texas

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.

The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper arm and is also held by thumbscrew to the float arm.

The bottom has a cavity for warm climate installations only. Easy access to valve and heater. Large 2” External AND Internal (5.1 cm) clean out drains. The cavity can be used to make the connection from the supply line to our valve.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

This diaphragm fits all Jug Model Valves.

Grade A compliant. Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies. Water circulation is a assisted with our patented baffle design and discharge ports.

Holds 6 gallons. Removable dome for quick and easy access to valve area. 30.5” x 16.5” x 27” tall. Sloped bottom for easy clean-out. 19” drinking height. Approximately 48 lbs.

Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve. Suggested where sugar sand is a problem in the water supply.

15" OD, corrugated plastic tubing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. Corrugated design provides rigidity without bulk when back filled with earth.

It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown. Pride of the Farm 1/4" Orifice on a VP124 Valve.

Valve works with up to 70 lbs. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. The case is made out of a rust-proof plastic and comes with an adapter to fit 3/4" male or 1/2" female pipe.

White 14 1/2" x 14 1/2" x 56" tall. 25-gallon FDA approved plastic has a valve located at the bottom of the tank which allows you to water your horses in transit, or at your destination with water from home.

Tank measures 64 1/2" L x 18" W x 12" deep. Constructed of an FDA-approved plastic. The Lay Down tank is an easy way to haul water on the floor of your trailer or in the back of a pickup.

A brass rod float arm 1/4" x 2" with threads on each end. Connects valve to 301 round float.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

The Megaflow is compact, robust and manufactured from non-corroding materials. Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute.

B81 includes: Ref. 6, 7 and 12 (see parts list in pictures attached) B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker.

Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly. #8 on breakdown.

Red octagon plunger that fits inside the Mira Fount cattle waterer RED valve.

Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line. #9 on breakdown.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

SPI hatch cover for model 4x4 energy free waterer.

Robert's Brass thumbscrew that connects the short arm and long arm.

Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks.