Livestock Waterers Farm Supplies For Sale In Tennessee

It moves the upper to and is also held by a thumbscrew to the float arm. The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin.

This piece holds the plunger and upper arm. The inside base of the Franklin Valve. No inside working parts included.

22" W x 32" L x 26" H The new Value Series waterers from SPI are a "no tools required" waterer. This 11 gallon waterer can handle up to 100 head of beef with a 250 watts heating element to withstand even those really cold nights.

It will turn on the heating element at 45 degrees Fahrenheit and off at 60 degrees to provide reliable freeze protection with the waterers. The Model HE-CNTRL air sensing thermostat is a replacement for the original "bulb and bellows" thermostat, used...

SPI 4x4 Rubber Drain Plug only.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

The VS20LPC has an insulated valve cavity and one piece hatch for no air loss. No more rust or corrosion! These electric waterers are built of a polyethylene construction creating a strong corrosion free product to provide many years of trouble free operaton.

A drain plug for the Arkfeld waterers - 2" in size - Black rubber.

Easy to install & installs in only minutes. Custom made to use in all Rubbermaid stock tanks with 1500 Watts of power. Guaranteed for 1 year & SAFE IN PLASTIC. Thermostatically controlled to only run when necessary.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

It has O'ring on one side & a Diaphragm on the other (not included). Pride of the Farm 5/32" Orifice on a VP124 Valve. #7 on breakdown.

14" x 30" long, 2" thick. Protect your underground water line from freezing. Can be used with Mirafount or other brand installations.

The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation. The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect the water line from freeze ups.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

Now a waterer that requires no electricity, so it saves 100% of your energy costs. Waterers work on the same principle as a thermos bottle. Whenever an animal drinks, it removes a quantity of water which is immediately replaced by ground water through...

SPI Drain Plug (#11) for all New Generation waterers.

A drain plug for Arkfeld waterers - 1 1/2" in size - Cork.

This repair kit fits the Models 101, 202 & 404 with or without heat.

3 year warranty. 40 1/2" x 28 1/4" x 14 1/4" The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can...

Replacement drain plug for MiraFount Waterers.

This quick release "D" clip is used on all of the New Generation Energy Free Waterers (4 per Unit) & on the Electric Waterer's inspection plates.

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan.

70 Gallon Open Trough Tank offers more features. Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies. It is loaded with features not available on any competing trough drinker.

You can expect an entire winter's heating bill of $25.00 or less - and this from a drinker that can water 250 head of beef using only 250 watts. There are no loose parts. The Pride of the Farm "King" Energy Efficient drinker is beefy & ruggedly built...

600 watt x 240 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.