Livestock Waterers Farm Supplies For Sale In St Paul

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

Weather seal is for Models 101, 202 & 404 with or without heat. The 101 model takes 1 kit, the 202 & 404 needs 2 kits.

Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body. #10 on breakdown.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

Our 8 notches do not protrude where they can be hit. Extra supply line protection, patented water circulation, multiple constant flow and drain options. Backed with the strongest warranty available.

Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly. #8 on breakdown.

1/2" orfice only for the inside of a Franklin Valve.

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

Protective cage permits use in all tanks. Thermostaically controlled to only run when necessary. The 1500 Watt element easily converts from a safe plastic floating de-icer into a submergible de-icer with a simple removal of the float.

Continuous flow disc and repair kit for use with Hudson valves.

SPI 3.75" Brass Short Float Stem only.

Water enters the MiraFount at 45 to 48 degrees. Capacity: 250 hd beef, 90 hd dairy, 4-9 1/2" ball closure, removable end panels. Each model comes with anchors for mounting to concrete pad, pipe insulation, and a section of 3/4" PVC pipe.

Filter replacement for Topaz & Megaflow Valves.

#7 on breakdown. It has O'ring on one side & a Diaphragm on the other (not included). Pride of the Farm 5/32" Orifice on a VP124 Valve.

Water enters the MiraFount at 45 to 48 degrees. Capacity: 150 hd beef 60 hd dairy, 2-9 1/4" ball closure. Each model comes with anchors for mounting to concrete pad, pipe insulation, and a section of 3/4" PVC pipe.

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected...

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. The larger tanks feature incorporated pallet fork opening on the bottom, eliminating accidental punctures...

White styrofoam triangular disc float only.

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.

Completely safe and effective treatment contains no chemicals, pesticides or herbicides; no toxic side effects. Scoop out any floating debris. Begins working immediately but may take 7-10 days to notice its effects.

Duramate Automatic Horse & Livestock Waterer is a large capacity 16-quart waterer is molded from impact-resistant polyethylene and has a durable metal cover. Includes 3/4” hose attachment and metal brackets for installation on a fence or wall.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

Includes a strap/hardware kit and a free 10' hose. 14” side panels x 14.5” front panel x 72” tall. No stand available for this water caddy. 3-year warranty. Comes standard with two shut-off valves, one for hose and the other for filling a bucket.

Orange plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount.