Livestock Waterers Farm Supplies For Sale In St John S

It has 70 inches of drinking length and holds 70 gallons. It is loaded with features not available on any competing trough drinker. Grade A compliant. 70 Gallon Open Trough Tank offers more features.

XtraFlo compact diaphragm valve has full-flow, high volume fill. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. The top entry model provides an air gap, preventing back-flow.

The orange cap only that fits over the insides of the Franklin Valve.

SPI 3.75" Brass Short Float Stem only.

It moves the plunger to and from the orfice. The upper arm is orange and is located in the top bracket of the top base and is held by a lock pin.

The Freeland Valve for livestock watering tanks is automatic, adjustable, approved non-siphoning, corrosion-proof and freeze-resistant. The Valve mounts in any type of tank at approximately 4 to 20" below the desired water level where it operates with...

This bolt package is for Models 101, 202 & 404 with or without heat.

600 watt x 120 volt heating element only Arkfeld waterer element replacement.

Hollow black plug used in all Franklin galvanized waterers.

This part number is for the arm only & is usually used on hog troughs. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

Robert's 3/4" leather cup ring that fits on the brass plunger.

Red octagon plunger that fits inside the Mira Fount cattle waterer RED valve.

Heating element ONLY for all Johnson Concrete Models EXCEPT the J360.

There also is a 3 inch opening at the bottom of the tower which permits drainage through a tile line to a lagoon, Constant flow at 70 gallon and at 45 gallons, Valve - 18 month unconditional warranty.

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/8" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level.

SPI hatch cover for model 4x4 energy free waterer.

XtraFlo compact diaphragm valve has full-flow, high volume fill. The valve has a 1” water level differential between opening and closing, reducing pump motor overload. The top entry model provides an air gap, preventing back-flow.

80 Watt Immersible element used in the PC 1 waterer.

Features High flow Compact robust construction 3/4″-2 1/2″ water level differential (increases as water pressure increases) Positive on/off operation Lock off with cord lock 5-150 PSI pressure rating Inlet filter Constructed from corrosion resistant...

Whenever an animal drinks, it removes a quantity of water which is immediately replaced by ground water through the valve. Waterers work on the same principle as a thermos bottle. 24" X 36" X 18"

Rugged plastic housing is molded from high-grade polystyrene. Trough-O-Matic Stock Tank Float Valve with Plastic Housing flows up to 245 gallons per hour and operates between 10-70 psi.

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

Black rubber seat to fit inside the Mira Fount Blue Plunger in a Mira Fount cattle waterer valve.

Connects valve to 301 round float. A brass rod float arm 1/4" x 7" with threads on each end.

Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers. Constructed of Cast Aluminum for ultimate effiency & safety. This donut shaped 500 Watt De-Icer is designed for multiple uses around the...

No inside working parts included. The orange male fitting end of the Franklin Valve.

600 watt x 240 volt heating element only. Arkfeld waterer element replacement.