Livestock Waterers Farm Supplies For Sale In St Catharines Niagara

SPI 2 1/2" Brass Short Float Stem only.

Float Valve for poultry waterers is made of plastic to cut down on corrosion and scale build-up. Overall length is about 6". Valve seat rotates for extended life. Inlet pipe thread is 1/2" male and 1/4" female.

3/4" male to female hose used to hook up the water line to the waterer.

Each valve comes with installation instructions, warranty information and parts list. The Hudson Valve"s unique design maintains fluid level in tanks and troughs with an exceptional patented float system.

15" OD, corrugated plastic tubing. Corrugated design provides rigidity without bulk when back filled with earth. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.

3/4" orfice only for the inside of a Franklin Valve.

6 1/2" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

33" X 58" X 19" Tested in continental U.S. to remain frost-free with as few as 6 head drinking every other day. Water enters the MiraFount at 45 to 48 degrees. The floats seal the water away from outside.

Unit is unnoticed by livestock - no cord in water. Custom made to use in all Rubbermaid stock tanks with 1500 Watts of power. Easy to install & installs in only minutes. Guaranteed for 1 year & SAFE IN PLASTIC.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Water pressure and has a capacity of 375 gallons per hour. The Trough-O-Matic float valve features a longer, deeper float which gives more leverage. The rust-proof plastic case comes with an adapter to fit a 3/4" male or 1/2" female pipe.

Our R-valve of 7.5 per inch holds the heat provided by incoming water. Notched flanges for easy anchoring. Stainless steel spring loaded valve cover removes easily. The Pride of the Farm the Performance One E-Drink is electrically heated Energy Efficient...

For large feed lot, dairy or cow/calf operations. 57.5” x 45.5” x 20” tall. Two valves are provided for a fast-recovering water supply. Holds 100 gallons. 5-year warranty. 20” drinking height.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

You never have to manually refill it. Keep your animal's water clean and fresh! Promote important water consumption with fresh clean water. Automatic siphon valve that adjusts the water level by the turn of a knob.

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

24" X 36" X 18" Tested in continental U.S. to remain frost-free with as few as 6 head drinking every other day. Water enters the MiraFount at 45 to 48 degrees. The floats seal the water away from outside.

Operates effecicently at the bottom of the bucket because warm water rises. Farm Innovator's Ice Chaser operates automatically only during freezing temperatures. SAFE IN PLASTIC. 1 year warranty.

The Pride of the Farm "King" Energy Free drinker is beefy & ruggedly built but simple. 2" built in drain, stainless steel spring loaded attachment pins make cover removal & replacement easy, recessed, protected notches for secure anchoring, overflow port...

Water tank/saddle rack for horse and stock trailers. Eliminate the problem of poor water quality and quit hauling those buckets! Measures approx. Carry 30 gallons of water with you right in the tack compartment of your trailer.

Johnson Waterer Element Clips to hold the heating element.

XtraFlo compact diaphragm valve has full-flow, high volume fill. XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

The orange cap only that fits over the insides of the Franklin Valve.

XtraFlo compact diaphragm valve has full-flow, high volume fill. XtraFlo is UV stabilized and corrosion resistant. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.