Livestock Waterers Farm Supplies For Sale In Springfield

Replacement Plastic Valve & Float f/ WFD85 and MFD85 field drinkers.

SUPERB ENERGY EFFICIENCY FOR NEW INSTALLATIONS YOU ONLY NEED ONE UNIT FOR UP TO 150 HEAD Please see our brochure WP012 Brochure

SPI 351/352 New Generation Gasket.

1000 Watt Immersible element used in the PC2 or PC10 waterer.

3" orange arm that fits between the lower arm and the float connect. This piece is held by two thumbscrews not included in this part.

SPI white corrugated baffle for model 4x4 energy free waterer.

* Compared to warming tanks with heaters, the Ice Sweeper saves money. * The device is all mechanical, no electricity required and built with quality material to provice long service in a harsh environment.

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

Working pressure range is 4-175 psi, working water temperature range 34-140°F. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

Each valve comes with installation instructions, warranty information and parts list. Valve body parts are made out of a durable glass-filled nylon, which is vented to eliminate siphoning.

Float Arm for the Mira Fount M3360, M3410, M3410-4, M3465 waterer.

The Robert's 3/4" brass valve housing only.

This diaphragm fits all Jug Model Valves.

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

Each opening is 5" x 9", Superb supply line protection. 70 Gallon Open Trough Tank offers more features. It has 70 inches of drinking length and holds 70 gallons. Feature Include: Recessed, protected notches for anchoring, Our 8 notches do not protrude...

It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID.

A brass rod float arm 1/4" x 4" with threads on each end. Connect valve to 301 round float.

A brass rod float arm 1/4" x 6" with threads on each end. Connects valve to 301 round float.

Arkfeld waterer element replacement. 600 watt x 240 volt heating element only.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

Has many uses around the home & farm. Operates with any 15 amp 120V electric heater or fan. Five controlled temperatures (one just right for you) & no installation required. Saves money by using power only when temperatures require.

No freezing occurred at this temperature-even after 7 days! Double wall, single piece poly construction -- ALL SMOOTH! Internal 3/4" (1.9 cm) AND external 2" (5.1 cm) drains. Optional ground mount tube (Model HT10) for hookup to underground service connections...

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

A brass rod float arm 1/4" x 12" with threads on each end. Connects valve to 301 round float.

No other parts are included with this Power Link. Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm. #1 on breakdown.

Plastic piece that sits on top of the float. It is held by a float screw and connects on to the bottom of the float arm.

This part number is for the arm only & is usually used on hog troughs. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.