Livestock Waterers Farm Supplies For Sale In South Dakota

SPI foamed 4x4 energy free waterer door only.

5 year warranty. Drinking height is 15" Door Opening is 9 1/2" x 9 1/2" and trough holds 17 gallons of water. SPI's energy Free models are built of a polyethylene construction creatin g a strong corrosion free product to provide man years of trouble free...

3/4" male to female hose used to hook up the water line to the waterer.

Fluid level forces the float to rise and close the diaphragm chamber, which expands to stop incoming flow. Each valve comes with installation instructions, warranty information and parts list.

Only water that is close to freezing is discharged. * Compared to warming tanks with heaters, the Ice Sweeper saves money. Compared to other "intermittent flow devices", the Ice Sweeper is very dependable, uses less water & shuts off water flow reliably...

Thermostat ONLY for all Johnson Concrete Waterer Models.

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. Available in Aqua Blue color only. 3 year warranty. The larger tanks come with 1.25� drains installed.

Turns on at 36 degrees and turns off at 48 degrees. Often used in Franklin & Arkfeld waterers. Surface mount thermostat used in galvanized waterers.

Filter replacement for Topaz & Megaflow Valves.

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

Plastic piece that sits on top of the float. It is held by a float screw and connects on to the bottom of the float arm.

Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body. #10 on breakdown.

A brass rod float arm 1/4" x 1 1/4" with threads on each end. Connects valve to 301 round float.

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

They mount above or below the water and give flows of up to 6 gallons per minute. FEATURES: Side, Bottom, Top Mounting Valve body screws apart by hand for easy servicing Flow stops when unscrewed for servicing Supplied with back-nut and seal washer Built...

30 Watt Heater for J303 Corner Mount Horse Stall Waterers.

Valve 36" Float Cord Only.

Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers. It measures 3.25" x 4.25" x 2.38".

Repair Kit for 716H Valve. Includes screen, retainer ring, diaphragm, shut-off pad and float.

The polyethylene used in our SPI Livestock Waterers is FDA and HPB approved, food grade, recyclable plastic. Meets "Grade A" Dairy requirements (non-siphoning). 5 year warranty. Very efficient use of energy.

Dependable, non siphoning valve - proven & trouble free. 2-2" drain holes for fast clean out. Optional wing bolts are available for Grade A inspections. No heat well needed; use an 8-12" tile; can be fitted on most existing pads.

This diaphragm fits all Jug Model Valves.

Robert's 1/2" Leather cup ring that fits on the brass plunger.

2" built in drain, stainless steel spring loaded attachment pins make cover removal & replacement easy, recessed, protected notches for secure anchoring, 250 watt heater, overflow port & dependable non-siphoning Durapride Valve.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.