Livestock Waterers Farm Supplies For Sale In Savannah

SPI Drain Plug (#11) for all New Generation waterers.

Repair kit includes 1 each screen, retainer ring, diaphragm, shut-off pad and float.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

No inside working parts included. The orange male fitting end of the Franklin Valve.

#4 on breakdown The connect the Cam & Power Link to the VP124 valve body. You will need 2 per valve assembly. Pride of the Farm Link pin only.

#2 on breakdown. This is the arm that opens & closes the plunger. No other parts come with the Cam Link. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin.

Corrugated design provides rigidity without bulk when back filled with earth. Unaffected by ground movement due to freezing & thawing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.

This diaphragm fits all Jug Model Valves.

Minimum inlet pressure 5 PSI, Maximum inlet pressure 150 PSI. It's design reduces stock damage & minimises blockage. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level differential from open to close.

3/4" male to female hose used to hook up the water line to the waterer.

1 per model EXCEPT 404 models need 2 kits. Weather seal Kit for Jug 101, 202 & 404 with or without heat.

Overall length is about 6". Inlet pipe thread is 1/2" male and 1/4" female. Valve seat rotates for extended life. Float and arm are molded of high-impact styrene and the valve body is made of Delrin.

3/4" orfice only for the inside of a Franklin Valve.

It has O'ring on one side & a Diaphragm on the other (not included). Pride of the Farm 5/32" Orifice on a VP124 Valve. #7 on breakdown.

#8 on breakdown. Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

1/2" orfice only for the inside of a Franklin Valve.

Suggested where sugar sand is a problem in the water supply. Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve.

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 3/4" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level.

U-bolts are not provided. Includes 3/4” hose attachment and metal brackets for installation on a fence or wall. Optimum pressure range is 20 to 50 psi. Ideal for horses, cattle, dogs and other similar sized animals.

Connects to 3/4" garden hose or adaptable for pipe. We stock all replacement parts. This Dare farm tank float valve with weather-resistant plastic housing has a 300 gallon per hour capacity and a tough blow-molded plastic float.

It has 70 inches of drinking length and holds 70 gallons. Grade A compliant. Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies. Backed with the strongest warranty available.

XtraFlo is UV stabilized and corrosion resistant. The top entry model provides an air gap, preventing back-flow. The valve has a 1” water level differential between opening and closing, reducing pump motor overload.

Unique baffles guard against icing & keep valve operating under severest conditions. Nature's ground water temperature does this job. Dependable, non siphoning valve - proven & trouble free.